Tecware black (TW-CA-NEXUS-M-BK)
 | Outdated Product A compact and relatively inexpensive gaming platform, the capabilities of which go far beyond its value category. So, the model belongs to the Mini Tower form factor, has a laconic design and an extremely efficient cooling system. The motherboard tray is ready to accommodate any of the modern MicroATX or Mini-ITX solutions. The compact form factor does not interfere with the system to use high-performance graphics and a powerful processor — 340 mm is allocated for video, and a tower up to 155 mm high can be installed to cool the CPU. Despite the affordable cost of the case, Tecware Nexus M received a magnetic dust grid both in front and on top. For fresh air intake, two pre-installed 120 mm fans are used. The front ventilation ducts are located on the side and bottom, another 120 mm fan th...at blows out is installed on the rear panel. There is also a large ventilation duct on the top cover, it is represented by extensive perforation. The power supply has space in the lower compartment. Of the memory drives, you can use two HDD 3.5 ″ devices and the same number of SSD 2.5 ″. There are four plugs for installing PCI expansion cards. The interface panel is located at the front edge of the top cover, it has: USB ports (one 3.0 and two 2.0), mini-Jack connectors, power and reset buttons. |
 |
A compact and relatively inexpensive gaming platform, the capabilities of which go far beyond its value category. So, the model belongs to the Mini Tower form factor, has a laconic design and an extremely efficient cooling system. The motherboard tray is ready to accommodate any of the modern MicroATX or Mini-ITX solutions. The compact form factor does not interfere with the system to use high-performance graphics and a powerful processor — 340 mm is allocated for video, and a tower up to 155 mm high can be installed to cool the CPU.
Despite the affordable cost of the case, Tecware Nexus M received a magnetic dust grid both in front and on top. For fresh air intake, two pre-installed 120 mm fans are used. The front ventilation ducts are located on the side and bottom, another 120 mm fan that blows out is installed on the rear panel. There is also a large ventilation duct on the top cover, it is represented by extensive perforation. The power supply has space in the lower compartment. Of the memory drives, you can use two HDD 3.5 ″ devices and the same number of SSD 2.5 ″. There are four plugs for installing PCI expansion cards. The interface panel is located at the front edge of the top cover, it has: USB ports (one 3.0 and two 2.0), mini-Jack connectors, power and reset buttons.
