RIOTORO CR1088 black
 | Outdated Product A fairly advanced computer case that can serve as a good basis for building a performant PC. The internal space of the system unit is divided into two separate chambers, but not one above the other, but parallel (back to back). The model differs in the compact dimensions corresponding to the Mini Tower standard. Any of the following motherboard sizes can be installed in the main chassis bay: ATX, Micro-ATX, and Mini-ITX. The maximum length of the graphics adapter can reach 300mm, and the CPU cooling is limited to a height of 122mm. On the motherboard side, the RIOTORO CR1088 case has a translucent sidewall. In the opposite section, there is a mounting place for the power supply and hard drive racks, while the place for installing the power supply is designed for the ATX format. The front p...anel of the system unit has a decorative RGB backlight. Additionally, a standard fan with a 120 mm impeller is also equipped with a backlight. The cooler from the kit is installed in front. Optionally, you can install 1 more front cooler, as well as 2 top and 1 rear. All ventilation ducts are protected from dust. The operation of the backlight can be controlled directly from the button block, which is placed on the front of the top cover. The control panel provides: power buttons, a backlight switch, a pair of 3.5 mm jacks and 2 USB 3.0 ports. |
 |
A fairly advanced computer case that can serve as a good basis for building a performant PC. The internal space of the system unit is divided into two separate chambers, but not one above the other, but parallel (back to back). The model differs in the compact dimensions corresponding to the Mini Tower standard. Any of the following motherboard sizes can be installed in the main chassis bay: ATX, Micro-ATX, and Mini-ITX.
The maximum length of the graphics adapter can reach 300mm, and the CPU cooling is limited to a height of 122mm. On the motherboard side, the RIOTORO CR1088 case has a translucent sidewall. In the opposite section, there is a mounting place for the power supply and hard drive racks, while the place for installing the power supply is designed for the ATX format. The front panel of the system unit has a decorative RGB backlight.
Additionally, a standard fan with a 120 mm impeller is also equipped with a backlight. The cooler from the kit is installed in front. Optionally, you can install 1 more front cooler, as well as 2 top and 1 rear. All ventilation ducts are protected from dust. The operation of the backlight can be controlled directly from the button block, which is placed on the front of the top cover. The control panel provides: power buttons, a backlight switch, a pair of 3.5 mm jacks and 2 USB 3.0 ports.
