Dark mode
only car invertersin all categories
only car inverters
USA

Pulsepad PSW-500

Photos - Car Inverter Pulsepad PSW-500
Photos 3
Expecting restock
A car inverter designed to power low-power 230 V AC consumers from a regular 12 V battery. The device has a rated output power of 500 W (short-term pulsed load surges of up to 1000 W are allowed). The output signal in the form of a pure sine wave (as in a household electrical network) allows you to use the Pulsepad PSW-500 inverter to power equipment sensitive to current quality: modern household appliances and electronics, heating circulation pumps, gas boilers with precise automation, etc. To connect the load, the device has one standard 230 V socket and one USB A connector, which can be used to power and recharge portable electronics. The device is provided with built-in protection against overheating, overload, short circuit and incorrect connection of wires to the battery. If the batt...ery is too deeply discharged, the inverter turns on an audible signal. The kit includes wires with round terminals and spare fuses.
Find prices on Amazon.com
Find prices on eBay.com
add to listmy lists
We recommend products in stockCar Inverters Pulsepad →
Cobra Power 500W
from $59.00 
for 12 V, cigarette lighter / crocodiles / cable, power: nominal 500 W, peak 1000 W, 2 sockets, USB A, USB C
Pulsepad PSW-500
pure sineUSB A
500 W
1200 W
2500 W
Connection
cable (to battery)
Battery connection voltage
12 V
Rated power output
500 W
Peak power output
1000 W
Output voltage
230 V
Output waveform
pure sine
Efficiency
94 %
Number of sockets
1 шт
USB-A
1
Low battery alarm
Protection
short circuit
overheating
overload
reverse polarity
Added to E-Catalog
august 2024

A car inverter designed to power low-power 230 V AC consumers from a regular 12 V battery. The device has a rated output power of 500 W (short-term pulsed load surges of up to 1000 W are allowed). The output signal in the form of a pure sine wave (as in a household electrical network) allows you to use the Pulsepad PSW-500 inverter to power equipment sensitive to current quality: modern household appliances and electronics, heating circulation pumps, gas boilers with precise automation, etc.

To connect the load, the device has one standard 230 V socket and one USB A connector, which can be used to power and recharge portable electronics. The device is provided with built-in protection against overheating, overload, short circuit and incorrect connection of wires to the battery. If the battery is too deeply discharged, the inverter turns on an audible signal. The kit includes wires with round terminals and spare fuses.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Filters
Models