USA

Pulsepad PSW-1200

Photos - Car Inverter Pulsepad PSW-1200
Photos 3
Expecting restock
A car inverter is a device for converting 12 V direct current into 230 V alternating current with a frequency of 50 Hz, as in a household electrical network. The "bundle" of the Pulsepad PSW-1200 inverter and a car battery can be used to power a load with a total power of 1200 W (short pulsed load surges up to 2400 W are allowed). The output signal, which has the form of a regular sine wave, is suitable for powering electricity consumers that are demanding of current quality: modern household appliances, circulation pumps, gas boilers with sensitive sensors, etc. The inverter has a small display showing the current load and output current characteristics, as well as an audible signal with which the device reports that the battery is too deeply discharged. There are two standard sockets and...one USB A connector for connecting the load. It is possible to connect a wired remote control via the RJ-45 port. The inverter's safety is ensured by built-in protection systems (against overheating, overload, short circuit and incorrect wiring).
add to listmy lists
Pulsepad PSW-1200
Connection
cable (to battery)
Battery connection voltage
12 V
Rated power output
1200 W
Peak power output
2400 W
Output voltage
230 V
Output waveform
pure sine
Efficiency
94 %
Number of sockets
2 шт
USB-A
1
Low battery alarm
Protection
short circuit
overheating
overload
reverse polarity
Screen
Remote control connection (RJ-45)
Dimensions
326x165x87 mm
Added to E-Catalog
august 2024

A car inverter is a device for converting 12 V direct current into 230 V alternating current with a frequency of 50 Hz, as in a household electrical network. The "bundle" of the Pulsepad PSW-1200 inverter and a car battery can be used to power a load with a total power of 1200 W (short pulsed load surges up to 2400 W are allowed). The output signal, which has the form of a regular sine wave, is suitable for powering electricity consumers that are demanding of current quality: modern household appliances, circulation pumps, gas boilers with sensitive sensors, etc.

The inverter has a small display showing the current load and output current characteristics, as well as an audible signal with which the device reports that the battery is too deeply discharged. There are two standard sockets and one USB A connector for connecting the load. It is possible to connect a wired remote control via the RJ-45 port. The inverter's safety is ensured by built-in protection systems (against overheating, overload, short circuit and incorrect wiring).

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Filters