Catalog   /   Automotive   /   Vehicle Accessories   /   Car Inverters   /   Pulsepad

Pulsepad PSW-1500

Photos - Car Inverter Pulsepad PSW-1500
Photos 10
Outdated Product
Car inverter with a rated output power of 1500 W. The device can be used to power electrical equipment operating on alternating current of 230 V from a regular 12 V car battery. Due to the shape of the output signal in the form of a regular sine wave, the Pulsepad PSW-1500 inverter is suitable even for powering "capricious" consumers of electricity that are sensitive to the quality of the current (circulation pumps, gas boilers, modern household appliances, etc.). The device, which has the shape of an almost regular parallelepiped measuring 362x165x87 mm, is equipped with two fans for cooling the "insides" and a set of protective systems (against overheating, overload, short circuit and incorrect connection of cables to the battery). The payload is connected to the inverter through two soc...kets, which are located on the end of the case. The device also has a USB-A connector, designed to power and recharge electronic devices. The kit includes wires with round terminals for connecting the inverter and the battery.
add to listmy lists
Pulsepad PSW-1500
Connection
cable (to battery)
Battery connection voltage
12 В
Rated power output
1500 W
Peak power output
3000 W
Output voltage
230 В
Output waveform
pure sine
Efficiency
89 %
Number of sockets
2 шт
USB-A
1 pcs
Protection
short circuit
overheating
overload
reverse polarity
Dimensions
362x165x87 mm
Added to E-Catalog
February 2023

Car inverter with a rated output power of 1500 W. The device can be used to power electrical equipment operating on alternating current of 230 V from a regular 12 V car battery. Due to the shape of the output signal in the form of a regular sine wave, the Pulsepad PSW-1500 inverter is suitable even for powering "capricious" consumers of electricity that are sensitive to the quality of the current (circulation pumps, gas boilers, modern household appliances, etc.).

The device, which has the shape of an almost regular parallelepiped measuring 362x165x87 mm, is equipped with two fans for cooling the "insides" and a set of protective systems (against overheating, overload, short circuit and incorrect connection of cables to the battery). The payload is connected to the inverter through two sockets, which are located on the end of the case. The device also has a USB-A connector, designed to power and recharge electronic devices. The kit includes wires with round terminals for connecting the inverter and the battery.

The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Pulsepad 2026 - new arrivals, bestsellers, and the most relevant models Pulsepad.
wonderful model, really honored
23 November 2024 
For light in an apartment or house, a refrigerator, a boiler, it is enough with a reserve. Reheat food in the microwave without problems. But cooking in a 2-kilowatt oven will not work. It works from 100 battery, with a load of 2 kW it is enough for 15-17 minutes of work, with a 100% charged battery, then it turns off. You can still use the light.
The advantage of fatigue is that there is light
I don't see it yet, I've been using it for 2 months
 i recommend it should buy
Add Review