Catalog   /   Automotive   /   Vehicle Accessories   /   Car Inverters   /   Pulsepad

Pulsepad PSW-1000

Photos - Car Inverter Pulsepad PSW-1000
Photos 4
Outdated Product
A car inverter (voltage converter) designed to power consumer devices operating on 230 V alternating current from a regular 12 V battery. The characteristics of this inverter allow it to service a load of up to 1000 W (short-term pulsed load surges of up to 2000 W are allowed). The output signal has the form of a regular sine wave - a necessary condition for powering some particularly "sensitive" devices, such as heating circulation pumps or gas boilers with modern automation. The Pulsepad PSW-1000 inverter is made in the form factor of an aluminum "brick" measuring 326x165x87 mm. On one end of the case there are fans for cooling the "insides", and on the opposite end there are connectors for connecting the load: two sockets and one USB-A port. The device is equipped with protection agains...t overload, overheating, short circuit and incorrect connection of wires to the battery. The round terminal cables needed to connect the inverter to the battery are included.
add to listmy lists
Pulsepad PSW-1000
Connection
cable (to battery)
Battery connection voltage
12 В
Rated power output
1000 W
Peak power output
2000 W
Output voltage
230 В
Output waveform
pure sine
Efficiency
89 %
Number of sockets
2 шт
USB-A
1 pcs
Protection
short circuit
overheating
overload
reverse polarity
Dimensions
326x165x87 mm
Added to E-Catalog
February 2023

A car inverter (voltage converter) designed to power consumer devices operating on 230 V alternating current from a regular 12 V battery. The characteristics of this inverter allow it to service a load of up to 1000 W (short-term pulsed load surges of up to 2000 W are allowed). The output signal has the form of a regular sine wave - a necessary condition for powering some particularly "sensitive" devices, such as heating circulation pumps or gas boilers with modern automation.

The Pulsepad PSW-1000 inverter is made in the form factor of an aluminum "brick" measuring 326x165x87 mm. On one end of the case there are fans for cooling the "insides", and on the opposite end there are connectors for connecting the load: two sockets and one USB-A port. The device is equipped with protection against overload, overheating, short circuit and incorrect connection of wires to the battery. The round terminal cables needed to connect the inverter to the battery are included.

The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Pulsepad 2026 - new arrivals, bestsellers, and the most relevant models Pulsepad.
wonderful model, really honored
23 November 2024 
For light in an apartment or house, a refrigerator, a boiler, it is enough with a reserve. Reheat food in the microwave without problems. But cooking in a 2-kilowatt oven will not work. It works from 100 battery, with a load of 2 kW it is enough for 15-17 minutes of work, with a 100% charged battery, then it turns off. You can still use the light.
The advantage of fatigue is that there is light
I don't see it yet, I've been using it for 2 months
 i recommend it should buy
Add Review