Dark mode
USA

PowerWalker VFI 1000 AT 1000 VA (10122180)

Photos - UPS PowerWalker VFI 1000 AT 1000 VA
Photos 7
Outdated Product
Inverter uninterruptible power supply with an output signal in the form of a regular sine wave. The battery pack, which provides power to connected devices in the absence of electricity in the network, consists of two batteries with a capacity of 9 Ah. It is possible to connect external batteries, as well as the operation of an uninterruptible power supply in tandem with a generator. The PowerWalker VFI 1000 AT UPS has an output power of 900W. To connect consumers, you can use three sockets with a reserve. This device does not have connectors for protecting data lines. But it is equipped with RS-232, USB and SmartSlot ports, which can be used as interfaces to control the operation of the uninterruptible power supply.
add to listmy lists
PowerWalker VFI 1000 AT 1000 VA
Main
Typeinverter (online)
Form factorstandard (Tower)
Input
Input voltage1 phase (230V)
Input voltage range80 – 300 V
Bypass (direct connection)manual/automatic
Output
Output voltage1 phase (230V)
Peak output power1000 VA
Rated output power900 W
Output voltage accuracy5 %
Output waveformpure sine wave (PSW)
Output frequency50/60 Hz
Redundant sockets3
Socket typetype F (Schuko)
Battery
Battery(ies) connection to UPS24 V
Total battery capacity9 Ah
Number of batteries2
Full charge time240 min
Max. charging current1.5 А
Cold start
External battery connection
Protection
Protectionshort circuit protection
overload protection
emergency cut-off socket
sound alarm
Fuseauto
Control interfacesRS-232
USB
SmartSlot
General
Operating temperature0 – 40 °C
Dimensions (HxWxD)191x140x327 mm
Weight9.11 kg
Official Websitepowerwalker.com
Added to E-Catalogaugust 2020
P/N
10122180

Inverter UPS. Correct sinusoid. Cold start.

Inverter uninterruptible power supply with an output signal in the form of a regular sine wave. The battery pack, which provides power to connected devices in the absence of electricity in the network, consists of two batteries with a capacity of 9 Ah. It is possible to connect external batteries, as well as the operation of an uninterruptible power supply in tandem with a generator. The PowerWalker VFI 1000 AT UPS has an output power of 900W. To connect consumers, you can use three sockets with a reserve. This device does not have connectors for protecting data lines. But it is equipped with RS-232, USB and SmartSlot ports, which can be used as interfaces to control the operation of the uninterruptible power supply.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog PowerWalker 2024 - new products, best sales and most actual models PowerWalker.
Filters
PowerWalker VFI 1000 AT often compared
PowerWalker VFI 1000 AT FR