USA

NAD C375BEE

Photos - Amplifier NAD C375BEE
Videos 1Photos 13
Outdated Product
$1,780.00 up to $2,052.00
The model is capable of providing sound with a power of 150 watts per channel when working with a load that has a dynamic impedance of 8 ohms. The design allows you to independently supplement the amplifier with DAC and phono stage modules, which, usually, are not included in the basic modification (this issue should be clarified before purchase). A USB port is also optionally available for connecting the amplifier to a computer as an external controlled device. There is a Phono port for a turntable, 4 pairs of audio outputs for acoustics and a special preamp output with the ability to adjust the signal level.
add to listmy lists
NAD C375BEE
Type:integral
Number of channels:2
Power per channel (8 ohms):150 W
Coef. damping:200
To amplifier (Main):RCA
Inputs:optical, USB
RCA inputs:7 steam(а)
Outputs:Pre-Amp
REC outputs:2 steam(а)

The model is capable of providing sound with a power of 150 watts per channel when working with a load that has a dynamic impedance of 8 ohms. The design allows you to independently supplement the amplifier with DAC and phono stage modules, which, usually, are not included in the basic modification (this issue should be clarified before purchase). A USB port is also optionally available for connecting the amplifier to a computer as an external controlled device. There is a Phono port for a turntable, 4 pairs of audio outputs for acoustics and a special preamp output with the ability to adjust the signal level.

All specifications
Specifications C375BEE
Main
Device typeintegrated amplifier
Element basetransistor
Toroidal transformer
Amplifier parameters
Number of channels2
Frequency range20 – 20000 Hz / A-weighted, right. 150 W /
Power per channel (8Ω)150 W
Signal to noise ratio102 dB / A-weighted, right. 500 mV out /
Signal-to-noise ratio (Main)123 dB / A-weighted, right. 150 W /
Signal to noise ratio (Phono MM/MC)77/76 dB
Damping factor200
Harmonic distortion0.009 % / to enter Main /
Channel sensitivity / impedance
Line input158 mV
100 kOhm
Main input1.2 V
10 kOhm
Phono MM/MC18/1.6 mV
47/0.1 kOhm
REC output1 kOhm
Preout0.08 kOhm
Connectors
InputsPhono
USB B / depending on modification /
optical / depending on modification /
RS-232
control input (IR)
To amplifier (Main)RCA
RCA7 pairs
OutputsPre-Amp / two pairs /
control output (IR)
For acoustics4 шт
REC (to recorder)2 pairs
Trigger output1 шт
Front panelindicators
audio input jack / Aux 3.5mm /
headphone output
Features
Adjustmentsbass control
treble adjustment
balance adjustment
level adjustment
More featuresBy-pass/Direct
ММ phono stage / depending on modification /
MC phono stage / depending on modification /
additional speaker connect
Bi-Wiring
external devices control
General
Remote control
PSUinternal
Power consumption290 W
Standby consumption0.5 W
Dimensions (WxDxH)435х396х150 mm
Weight15.3 kg
Added to E-Catalogjanuary 2014
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog NAD 2024 - new products, best sales and most actual models NAD.
Video reviews
Additional features amplifier NAD C375BEE:
  • Headphone output impedance 68 ohm
Model modifications:
    The classic model of the amplifier is not equipped with either a phono stage module or a DAC. MDC design allows you to add both modules to the amplifier. Usually this is done at the factory, so amplifiers in stores may already be sold with a built-in DAC or phono stage.
Filters