Italtherm CITY CLASS 35 F 32.4 kW
 | Outdated Product A powerful and high-tech gas double-circuit wall-mounted gas boiler with a closed (turbocharged) combustion chamber, a microprocessor control system, an advanced modulating burner and proprietary Intelligent Combustion System technology. It is one of the older models of the Italtherm City Class family. It has a high useful thermal power up to 32.4 kW, demonstrates a decent efficiency. Such heat output is quite enough to organize heating of detached cottages, as well as office, commercial and household premises with a total area of 25 to 259 m². It is an efficient modern and safe solution that can be installed directly in residential areas. In addition to heating, the Italtherm CITY CLASS 35 F gas boiler is able to provide hot water for the simultaneous operation of two points of analysis (...up to 18.6 l / min). Only high-quality components are used in the design of the device: a primary copper heat exchanger, a stainless steel hot water heat exchanger, a brass hydraulic group, a durable electric three-way valve, a low-noise circulation pump. The boiler is equipped with an innovative gas burner with a wide modulation range of 1:10, the use of which allows you to adjust the power and increase the efficiency of fuel use. A full range of protective systems is provided, including frost protection. E-Catalog uses affiliate links compensated by our partners. |
A powerful and high-tech gas double-circuit wall-mounted gas boiler with a closed (turbocharged) combustion chamber, a microprocessor control system, an advanced modulating burner and proprietary Intelligent Combustion System technology. It is one of the older models of the Italtherm City Class family. It has a high useful thermal power up to 32.4 kW, demonstrates a decent efficiency.
Such heat output is quite enough to organize heating of detached cottages, as well as office, commercial and household premises with a total area of 25 to 259 m². It is an efficient modern and safe solution that can be installed directly in residential areas. In addition to heating, the Italtherm CITY CLASS 35 F gas boiler is able to provide hot water for the simultaneous operation of two points of analysis (up to 18.6 l / min).
Only high-quality components are used in the design of the device: a primary copper heat exchanger, a stainless steel hot water heat exchanger, a brass hydraulic group, a durable electric three-way valve, a low-noise circulation pump. The boiler is equipped with an innovative gas burner with a wide modulation range of 1:10, the use of which allows you to adjust the power and increase the efficiency of fuel use. A full range of protective systems is provided, including frost protection.
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Italtherm 2026 - new arrivals, bestsellers, and the most relevant models Italtherm.
All parts are copper or brass It works very noisily, vibration is felt.. Replaced the air fan, noise and vibration decreased slightly just bought Italtherm CITY CLASS 25 F i recommend it don't buy |
Copper heat exchanger, brass hydraulic group, easy to maintain, all components are of high quality, European. Convenient settings, digital knobs, not mechanics as some reviews say. All intervals can be set in those menus, if it turns on often, depending on the volume and length of the coolant, you can set the heating operation delay as you like. Water heating is good, smooth, there are no temperature changes, enough for 2 points. A little noisy. With factory settings, the heating turns on (clocks) every minute. use Italtherm CITY CLASS 25 F few months |
You won’t sleep with him, or you’ll get used to such a stupid mode of operation Mechanical twisters Loud, minimum temperature lights up and turns off every 2 minutes use Italtherm CITY CLASS 25 F more than year |