Italtherm CITY CLASS 20 F 19.5 kW
 | Outdated Product A reliable and efficient gas boiler from the Italian company Italtherm, which can be a good choice for heating a room up to 156 m². This is a combined two-circuit model that allows you to organize the work of both heating and hot water. The device uses a closed combustion chamber and a heater with the possibility of flame modulation. Automatic temperature control and the ability to fine-tune the heating allow the model to be connected to both radiator batteries and underfloor heating. The Italtherm CITY CLASS 20 F gas boiler is assembled from the highest quality components. A copper heat exchanger and a brass hydraulic group ensure an extremely long service life of the heating system. The auxiliary heat exchange circuit that serves the hot water supply is built on the basis of no less reli...able and durable stainless steel. The design includes a circulation pump. There is also an expansion tank. Summer mode option available. The electronic control system makes the heating setting as simple and accurate as possible. This model combines maximum efficiency and maximum economy. The boiler is mounted on a wall suspension. The heating system can be powered both from a gas pipeline and an autonomous cylinder with liquefied gas. E-Catalog uses affiliate links compensated by our partners. |
A reliable and efficient gas boiler from the Italian company Italtherm, which can be a good choice for heating a room up to 156 m². This is a combined two-circuit model that allows you to organize the work of both heating and hot water. The device uses a closed combustion chamber and a heater with the possibility of flame modulation. Automatic temperature control and the ability to fine-tune the heating allow the model to be connected to both radiator batteries and underfloor heating.
The Italtherm CITY CLASS 20 F gas boiler is assembled from the highest quality components. A copper heat exchanger and a brass hydraulic group ensure an extremely long service life of the heating system. The auxiliary heat exchange circuit that serves the hot water supply is built on the basis of no less reliable and durable stainless steel. The design includes a circulation pump. There is also an expansion tank. Summer mode option available. The electronic control system makes the heating setting as simple and accurate as possible. This model combines maximum efficiency and maximum economy. The boiler is mounted on a wall suspension. The heating system can be powered both from a gas pipeline and an autonomous cylinder with liquefied gas.
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Italtherm 2026 - new arrivals, bestsellers, and the most relevant models Italtherm.
All parts are copper or brass It works very noisily, vibration is felt.. Replaced the air fan, noise and vibration decreased slightly just bought Italtherm CITY CLASS 25 F i recommend it don't buy |
Copper heat exchanger, brass hydraulic group, easy to maintain, all components are of high quality, European. Convenient settings, digital knobs, not mechanics as some reviews say. All intervals can be set in those menus, if it turns on often, depending on the volume and length of the coolant, you can set the heating operation delay as you like. Water heating is good, smooth, there are no temperature changes, enough for 2 points. A little noisy. With factory settings, the heating turns on (clocks) every minute. use Italtherm CITY CLASS 25 F few months |
You won’t sleep with him, or you’ll get used to such a stupid mode of operation Mechanical twisters Loud, minimum temperature lights up and turns off every 2 minutes use Italtherm CITY CLASS 25 F more than year |