Dark mode
USA
Catalog   /   Climate, Heating, Water Heating   /   Heating & Boilers   /   Boilers   /   Italtherm

Italtherm CITY CLASS 30 F 28.2 kW

Photos - Boiler Italtherm CITY CLASS 30 F 28.2 kW
Outdated Product
A wall-mounted gas boiler designed for heating and hot water for domestic needs. This device can heat a house with an area of up to 226 m². The design of the Italtherm CITY CLASS 30 F boiler uses high-quality units and components. The primary heat exchanger (for heating) is made of copper, the secondary (for DHW) is made of stainless steel, and the hydraulic group is made of brass. A 3-speed Grundfos pump is responsible for the circulation of water in the heating circuit. The intelligent control system flexibly controls the modulating burner to achieve maximum efficiency and economy across the entire power range (from 10.2 kW to 28.2 kW). When operating at full capacity, the boiler consumes up to 3.17 m³ of gas per hour. The equipment has a set of sensors and safety systems that provide pr...otection against flame extinction, overheating of the liquid in the circuit, drop in gas pressure in the main line, lack of draft, freezing of the coolant, etc.
add to listmy lists
Italtherm CITY CLASS 30 F 28.2 kW
Energy source:gas
Mount:wall, dual-circuit
Boiler power:28.2 kW, area ~ 226 m²
Combustion chamber:closed, flue 60/100 mm
DHW temperature:from 35 °С, up to 55 °С

A wall-mounted gas boiler designed for heating and hot water for domestic needs. This device can heat a house with an area of up to 226 m². The design of the Italtherm CITY CLASS 30 F boiler uses high-quality units and components. The primary heat exchanger (for heating) is made of copper, the secondary (for DHW) is made of stainless steel, and the hydraulic group is made of brass.

A 3-speed Grundfos pump is responsible for the circulation of water in the heating circuit. The intelligent control system flexibly controls the modulating burner to achieve maximum efficiency and economy across the entire power range (from 10.2 kW to 28.2 kW). When operating at full capacity, the boiler consumes up to 3.17 m³ of gas per hour. The equipment has a set of sensors and safety systems that provide protection against flame extinction, overheating of the liquid in the circuit, drop in gas pressure in the main line, lack of draft, freezing of the coolant, etc.

All specifications
Specifications CITY CLASS 30 F
Main
Energy sourcegas
Installationwall
Typedual-circuit (heating and DHW)
Heating area226 m²
Technical specs
Heat output28.2 kW
Min. heat output10.2 kW
Power supply230 V
Power consumption132 W
Coolant min. T35 °С
Coolant max. T80 °С
Heating circuit max. pressure3 bar
DHW circuit max. pressure6 bar
Consumer specs
DHW min. T35 °С
DHW max. T55 °С
Performance (ΔT=25°C)16 L/min
"Summer" mode
Heated floor mode
Circulation pump
Boiler specs
Efficiency94 %
Combustion chamberclosed (turbocharged)
Flue diameter60/100 mm / 80/80 for split flue /
Inlet gas pressure20 mbar
Max. gas consumption3.17 m³/h
Expansion vessel capacity8 L
Expansion vessel pressure1 bar
Connections
Mains water intake1/2"
DHW flow1/2"
Gas supply1/2"
Central heating flow3/4"
Central heating return3/4"
Safety
Safety systemsgas pressure drop
water overheating
flame loss
draft control
water circulation failure
frost protection
More specs
Dimensions (HxWxD)727x400x300 mm
Weight30.3 kg
Official Websiteen.italtherm.it
Added to E-Catalogaugust 2017
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Italtherm 2024 - new products, best sales and most actual models Italtherm.
FAQ: 10 frequently asked questions about heating boilersAnswers to common questions in the section "heating boilers"
Filters
Models
Brands
(energy source) 
gas 
Out of stock
CITY CLASS 30 F