HyperX Predator DDR4 2x8GB HX430C15PB3K2/16
 | Outdated Product A set of high-capacity DDR4-3000 RAM modules. It consists of two single-sided 8-chip modules with a volume of 8 GB each. The manufacturer is positioned more as a product for enthusiasts and gamers. Designed for installation in home and gaming systems. With a high effective nominal clock speed of 3000 MHz, it shows the highest throughput of 24000 Mbps. At the same time, the modules operate at a relatively low CL15-17-17 timings and a voltage of 1.35 V, which reduces the latency of the memory subsystem and improves both general and gaming performance. It should be noted that this frequency is activated automatically only if the motherboard supports Intel XMP 2.0 technology. Otherwise, the mode will be set to DDR4-2400 CL17-17-17 @ 1.2V, and the above parameters will need to be entered into t...he BIOS settings manually. Kingston HyperX Predator DDR4 Memory Module Kit [HX430C15PB3K2/16] is highly compatible and can work in any configuration based on 6th Gen Intel Core processors and above, as well as AMD Ryzen processors. The manufacturer claims that there are special optimizations for working with Intel Core i7 HEDT processors, 100-series chipsets and X99 motherboards. The presence of full support for Intel Extreme Memory Profiles (Intel XMP) version 2.0 technology allows you to effectively use the entire frequency potential of the kit. To improve stability during overclocking, there are passive aluminium heatsinks that can quickly dissipate small amounts of heat. E-Catalog uses affiliate links compensated by our partners. |
HyperX HX430C15PB3K2/16 | |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
A set of high-capacity DDR4-3000 RAM modules. It consists of two single-sided 8-chip modules with a volume of 8 GB each. The manufacturer is positioned more as a product for enthusiasts and gamers. Designed for installation in home and gaming systems. With a high effective nominal clock speed of 3000 MHz, it shows the highest throughput of 24000 Mbps. At the same time, the modules operate at a relatively low CL15-17-17 timings and a voltage of 1.35 V, which reduces the latency of the memory subsystem and improves both general and gaming performance.
It should be noted that this frequency is activated automatically only if the motherboard supports Intel XMP 2.0 technology. Otherwise, the mode will be set to DDR4-2400 CL17-17-17 @ 1.2V, and the above parameters will need to be entered into the BIOS settings manually. Kingston HyperX Predator DDR4 Memory Module Kit [HX430C15PB3K2/16] is highly compatible and can work in any configuration based on 6th Gen Intel Core processors and above, as well as AMD Ryzen processors.
The manufacturer claims that there are special optimizations for working with Intel Core i7 HEDT processors, 100-series chipsets and X99 motherboards. The presence of full support for Intel Extreme Memory Profiles (Intel XMP) version 2.0 technology allows you to effectively use the entire frequency potential of the kit. To improve stability during overclocking, there are passive aluminium heatsinks that can quickly dissipate small amounts of heat.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog HyperX 2026 - new arrivals, bestsellers, and the most relevant models HyperX.
1 0 6 7 |
My memory (2x8) 3200 (16-18-18-36) was quite responsive to overclocking, even though the chips are Hynix. My timings dropped to 17-22-22 at 4100, but I can't find that screenshot (I currently just have 4 sticks installed). Here's a screenshot of the results: https://prnt.sc/vwnfnr Just don't forget that I also increased the voltage on VCCIO, VCCSA, but not more than 1.2-1.23v (could be individual), don't set it more than 1.25v. Good overclocking potential. Used for over a year at 1.44V and nothing happened to them (currently have 4 pieces, B-die(2x16GB) and these at 3800MHz at 1.42V). There are no disadvantages (for me). For someone, the disadvantage might be their height.  Bohdan Artemenko: use HyperX HX433C16PB3K2/16 more than year |
Good memory. Overclocked to 3600. Timings= 18-20-20-20-40. Voltage= 1.35 V. Overclocked to 4000. Worked okay, but on Ryzen 7 3700x left it at 3600. Cold, excellent, fast not found |
Bought it for the B450 chipset. At first I thought about getting something from G.Skill, but it didn’t work out. Also, the motherboards I was interested in listed more modest frequencies than HyperX, or some RAM lines were not listed in the QVLs at all. I got SK hynix C-die. Of course, I didn’t win the Samsung lottery, but I didn’t have time to get upset either — it immediately ran on the 3200/16-18-18 XMP profile, later I overclocked it to 3333/15-16-16 and 3466/16-18-18. I’m new to this, and I’m sure there’s still room for overclocking, especially since the motherboard turned out to be very user-friendly in this regard (ASRock Fatal1ty B450 ITX/AC). The CPU is a second-generation R5 2400G; with the first generation, overclocking should be worse. Good compatibility with ASRock on the AM4 socket. Restrained design (though the Fury lineup still looks better and has a lower height; unfortunately, the timings there are significantly higher). 8GB sticks are only single-rank, standard random chips, STICKERS :)  Vitaliy: use HyperX Predator DDR4 2x8GB less than month |
