Frontier Chimbu black
 | Outdated Product Stylish and relatively inexpensive computer case Midi Tower with good cooling. The facade is equipped with a grille with an air flow separator. Four 120 mm turntables (three in front and one in the back) are responsible for the intensity of ventilation, which additionally have decorative RGB lighting. This case will allow you to use various cooling schemes. On top there is room for two auxiliary fans. The air fans on the front can be replaced with a high performance 360mm liquid radiator. The top cover is able to accommodate a 240mm water heat exchanger. The Frontier CHIMBU computer case is able to effectively interact with the most modern digital devices. This case is pre-installed with a USB Type C 3.2 connector, which provides high-speed data transfer. Due to the lower placement of the...power supply, it will be possible to isolate the PSU airflow from blowing the main part of the chassis. To stabilize the temperature of the processor, you can use any tower up to 160 mm high. 340 mm is allotted for installing a discrete video card. This platform allows you to put two 3.5″ drives and two more 2.5″ devices. The housing is made of sheet metal with a thickness of about 0.6 mm. The viewing side is tempered glass 4 mm. |
 |
Stylish and relatively inexpensive computer case Midi Tower with good cooling. The facade is equipped with a grille with an air flow separator. Four 120 mm turntables (three in front and one in the back) are responsible for the intensity of ventilation, which additionally have decorative RGB lighting. This case will allow you to use various cooling schemes. On top there is room for two auxiliary fans.
The air fans on the front can be replaced with a high performance 360mm liquid radiator. The top cover is able to accommodate a 240mm water heat exchanger. The Frontier CHIMBU computer case is able to effectively interact with the most modern digital devices. This case is pre-installed with a USB Type C 3.2 connector, which provides high-speed data transfer. Due to the lower placement of the power supply, it will be possible to isolate the PSU airflow from blowing the main part of the chassis. To stabilize the temperature of the processor, you can use any tower up to 160 mm high. 340 mm is allotted for installing a discrete video card. This platform allows you to put two 3.5″ drives and two more 2.5″ devices. The housing is made of sheet metal with a thickness of about 0.6 mm. The viewing side is tempered glass 4 mm.
