Frime Illusion without PSU
 | Outdated Product A relatively inexpensive case with a stylish and attractive design, as well as sufficiently large features that allow you to assemble a performant gaming computer on its basis. The Midi Tower platform is tailored for an ATX motherboard. The maximum graphics length is 360 mm, and the height of the processor tower can reach up to 160 mm. The front panel and right side are made of tempered glass. The main feature of the case is the presence of LED lighting, which significantly increases the decorative value of the platform. The Frime Illusion case has a complete set of fans: 3 "turntables" are installed on the front panel, 1 more impeller is mounted on the back. The chassis is divided into two sections. The bottom section, closed with a metal casing, contains a power supply unit and a rack fo...r two 3.5″ HDD hard drives. Two more 2.5″ SSDs can be mounted behind the tray. The front panel is complemented by side ventilation ducts, which provide the body with the necessary fresh air for cooling. To improve air convection, there are ventilation ducts both on the top panel and on the bottom. The user can choose the body in any of three colours: the backlight can be red, green or blue. |
 |
A relatively inexpensive case with a stylish and attractive design, as well as sufficiently large features that allow you to assemble a performant gaming computer on its basis. The Midi Tower platform is tailored for an ATX motherboard. The maximum graphics length is 360 mm, and the height of the processor tower can reach up to 160 mm. The front panel and right side are made of tempered glass.
The main feature of the case is the presence of LED lighting, which significantly increases the decorative value of the platform. The Frime Illusion case has a complete set of fans: 3 "turntables" are installed on the front panel, 1 more impeller is mounted on the back. The chassis is divided into two sections. The bottom section, closed with a metal casing, contains a power supply unit and a rack for two 3.5″ HDD hard drives. Two more 2.5″ SSDs can be mounted behind the tray. The front panel is complemented by side ventilation ducts, which provide the body with the necessary fresh air for cooling. To improve air convection, there are ventilation ducts both on the top panel and on the bottom. The user can choose the body in any of three colours: the backlight can be red, green or blue.
