Electro-Voice EVU2062/95

The Electro-Voice EVU-2062/95 (Black) is a compact two-way ultracompact woofers that can be used in a variety of applications where high quality sound reinforcement is required in an ultra-compact lightweight enclosure. The enclosure design utilizes asymmetric angles to maintain tight clearances to wall and ceilings while providing optimal coverage... morepatterns making it ideal to blend into surroundings. This design was optimized for wall, stage lip and under balcony applications.The EVU-2062/95 incorporates the ICT-1-8, a high-output 1.3" diaphragm titanium compression driver coupled to a Constant Directivity 90deg. X 50deg. rotatable waveguide. The ICT-6.5-16 woofer was developed using FEA

The Electro-Voice EVU-2062/95 is a compact two-way loudspeaker system that can be used in a variety of applications where high quality sound reinforcement is required in an ultra-compact lightweight enclosure. The enclosure design utilizes asymmetric angles to maintain tight clearances to wall and ceilings while providing optimal coverage patterns... moremaking it ideal to blend into surroundings. This design was optimized for wall, stage lip and under balcony applications.The EVU-2062/95 incorporates the ICT-1-8, a high-output 1.3” diaphragm titanium compression driver coupled to a Constant Directivity™ 90° x 50° rotatable waveguide. The ICT-6.5-16 woofer was developed using FEA optimization to provide the highest sensitivity while achieving the highest level of speech intelligibility. The crossover design uses 18-dB-per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response and a protection circuit for long term reliability.The EVU series is constructed of 9-ply hardwood plywood enclosures with six integral M8 suspension points to support a wide variety of mounting positions. The EVU system is finished in textured paint, available in either white or black. Each EVU system includes a universal U-bracket to facilitate mounting. The U-bracket provides full unobstructed rotation of the loudspeaker (330° unobstructed rotation if the transformer kit is installed). Additional mounting points are located on the rear of the enclosure for use with an Omnimount™ type bracket. An available 70.7/100-V transformer kit may be easily mounted over the input panel for use in distributed systems. All of these features give you the flexibility to address a large range of venues, while quickly and precisely supporting customer requirements.Features:Sonically matched to all EV-Innovation linesSophisticated 18-dB-octave passive crossover/EQ networksAsymmetrical enclosure for ideal under-balcony and stage-lip aiming1.3” (33 mm) diaphragm, 1.4” (36 mm) exit pure titanium compression driverDual 6.5” (165 mm) LF transducersAdvanced third-order crossover network with HF protectionCoverage pattern: 90° x 50° Constant DirectivityTM rotatable waveguide94 dB sensitivity, 125 dB maximum SPLSystem rating: 300 W continuous, 1200 W peak(6) M8 threaded suspension pointsUniversal U-bracket included70.7/100-V transformer accessory optionalNL4 cover plate accessory optionalOptional Neutrik Speakon(R) connector panelSpecifications:Axial Sensitivity (SPL, 1 W @ 1 m): 94 dB (1W/1M)Color: WhiteFinish: Textured paintNominal Impedance: 8 ohmWaveguide: 6 in. x 6 in., rotatableFrequency Response (-3 dB): 100 - 16000 Hz Half SpaceFrequency Response (-10 dB): 70 - 20000 Hz Half Space RecommendedHigh-Pass Frequency: 90 HzMax. SPL/1m (calc) Continuous: 119, Peak: 125 dBCoverage (Nominal -6 dB) H: 90 °Coverage (Nominal -6 dB) V: 50 °System Power Handling (Continuous/Program/Peak): 300//1200