Deepcool Tesseract black (DP-CCATX-TSRBFBK)
Photos 21 | Outdated Product $39.56 up to $45.40 The case follows the traditions of classic computer fashion. This is a very roomy Midi Tower platform, which is well suited for mounting performant hardware resources. The height of the CPU can be up to 169mm, and the length of the graphics card is 310mm. Motherboard size: ATX, MicroATX, Mini-ITX. The main sidewall is completely metal. Instead of a viewing window, perforation is provided, which makes the ventilation of the platform more efficient. There is a mesh surface on the front. The upper part of the front panel is occupied by four plugs for installing 5.25″ devices. At the same time, the plugs are well blown. At the bottom of the front part there is a ventilation channel. The Deepcool Tesseract computer case can be equipped with a performant liquid cooling system. The design of the...case provides screwless fastening of hard drives and optical drives. Unlike other classic cases, this model has a bottom-mounted power supply, while the unit itself can be placed with the fan both up and down. Interface list: one USB 2.0 port, one USB 3.0 port, 3.5mm headphone and microphone jacks. The case will confidently cope with the creation of a well-optimized PC. The model can be recommended for assembling both a workstation and a gaming system. |
The case follows the traditions of classic computer fashion. This is a very roomy Midi Tower platform, which is well suited for mounting performant hardware resources. The height of the CPU can be up to 169mm, and the length of the graphics card is 310mm. Motherboard size: ATX, MicroATX, Mini-ITX. The main sidewall is completely metal. Instead of a viewing window, perforation is provided, which makes the ventilation of the platform more efficient.
There is a mesh surface on the front. The upper part of the front panel is occupied by four plugs for installing 5.25″ devices. At the same time, the plugs are well blown. At the bottom of the front part there is a ventilation channel. The Deepcool Tesseract computer case can be equipped with a performant liquid cooling system. The design of the case provides screwless fastening of hard drives and optical drives.
Unlike other classic cases, this model has a bottom-mounted power supply, while the unit itself can be placed with the fan both up and down. Interface list: one USB 2.0 port, one USB 3.0 port, 3.5mm headphone and microphone jacks. The case will confidently cope with the creation of a well-optimized PC. The model can be recommended for assembling both a workstation and a gaming system.
|
|
Before buying always check characteristics and configuration of product with online store manager
Catalog Deepcool 2024 - new products, best sales and most actual models Deepcool.
old school
Deepcool Tesseract BF is a representative of the old school of full-size Full Tower computer cases. It has holes for an external remote water cooling system (almost no one uses these now) and a whole bunch of slots for 5.25-, 3.5- and 2.5-inch disk drives (given the large volume of modern disks, many slots are not need). It would be better to leave more space for the graphics card (only models shorter than 31 cm are allowed).
blue blue
The location of the power supply is lower, so it does not suck in hot air from other PC components and makes less noise. Places for low-speed 12-cm fans are provided on all panels (except for the rear side, where it is not needed). The kit comes with only one fan with Deepcool's signature blue blades. Any processor cooler will fit (allowable height of 16.9 cm is even more than necessary).
Dust and vibration
Tesseract BF has, perhaps, only two drawbacks: the lack of a dust filter on the top panel (dust will simply fall inside the PC) and the HDD sled without rubber vibration pads. But all this is not critical and, despite the archaisms, Tesseract BF is a worthy candidate for assembling a powerful gaming or professional PC (video editing may require a lot of HDD). Fans of complete silence are better off looking for a more expensive model.