BIAMP VLF-208

Community's VLF208 is a compact dual 8" subwoofer system with a no-grille design that can be installed under stages, in walls or ceilings, or in other low profile locations in either the vertical or horizontal mounting position. Its extremely low profile enclosure is narrow enough to fit comfortably between wall studs, providing "hidden" LF extensi... moreon. With a response down to 70Hz in passive mode or 60Hz using digital signal processing, the VLF208 can function in steered bass arrays, and is equipped with fly points and four rubber feet with recessed foot mounting locations on two sides.The VLF208 is a powerful and innovative low frequency subwoofer that when arrayed is effective in reducing unwanted reflections in theatres, restaurants, auditoria, houses of worship, schools and other applications, fitting comfortably into areas where larger subwoofers are impractical.Applications:Houses of WorshipPerforming arts centersTheaters, lecture hallsAuditoriaRestaurantsThe "cafe gymnatorium"Portable bass reinforcementUnder-stage, in-wall, under-seating and ceiling mount applicationsFeatures:Low profile design, small footprintDesigned to work as a traditional subwoofer or insteered bass arraysDYNA-TECH protection circuitrySuitable for in-wall, under-seating, under-stage and other "hidden" LF applicationsOptional wall/ceiling mounting brackets and array brackets for multiple cluster configurationsAvailable in black or white finishesFive-year warrantySpecifications:Loudspeaker Type: Compact subwooferOperating Range:55Hz-400Hz60Hz-160Hz (+/-1dB)processedMax Input Ratings: 300W continuous, 750W program, 4 ohms, 35 volts RMS, 77 volts momentary peakRecommended Power Amplifier: 630W to 900W @ 4 ohmsSensitivity (1W/1m): 96dB SPL (63Hz to 160Hz 1/3octave bands)Maximum Output: 121 dB SPL/128 dB SPL (peak)Nominal Impedance: 4 ohmsMinimum Impedance: 4.8 ohms @ 130 HzNominal -6dB beamwidth: 360° H x 180° VAxial Q/DI: 1/0, 60Hz to 160HzRecommended Signal Processing: 55Hz high pass filter,48 dB/OctDrivers: LF (2) 8"Driver Protection: DYNA-TECHInput Connection:(1) NL4-compatible locking connector(1) 2 conductor barrier stripEnclosure: 11-ply cross-laminated birchFinish: Black or White paint finishMounting/Rigging Provisions: (8) M10 hang pointsRequired Accessories: Digital signal processorSupplied Accessories: (4) Rubber feetOptional Accessories:VLF-SAB steered array bracketVLF-Y208 yoke mounting bracketDimensions: 8.25" H x 21.75" W x 13" DWeight: 40.7 lbs Biamp VLF208B Dual 8 Subwoofer 300W, Black.

The Community VLF-Y208 yoke bracket is designed to mount the VLF208 subwoofer in either a vertical or horizontal orientation. Biamp VLF-Y208 Yoke Mounting Bracket for VLF208 Subwoofer, Black.