ARTI WH Flat M Dry 50L/2

High-quality storage compact vertical water heater with "dry" heating elements and the ability to work in systems using solar energy. It features a special flat design developed by German engineers, fast heating (less than 1 hour) and an increased wall thickness of the enameled tank (2.5 mm), made of high-quality European structural steel. The improved polyurethane foam thermal insulation with a thickness of 22 mm minimizes heat losses and keeps the hot water temperature as long as possible after the boiler is turned off.

The electrical part of the ARTI WH Flat M Dry 50L/2 water heater was developed by the Italian concern Thermowatt and meets all European quality and safety standards. Two so-called "dry" heaters with a total power of 2 kW (1000 + 1000 W) provide prompt and silent heating of water with minimal scale formation. It is also worth noting the innovative Arti ECO cold water supply system (water enters the tank through numerous holes pointing down).

Thanks to this solution, the water heating time is reduced by 15% compared to a conventional filling system. For additional electrochemical protection of the tank and heater flasks against corrosion, the device uses an oversized magnesium anode, the service life of which is at least 2 years. There is protection against overheating, freezing, turning on without water and overpressure.