AEG BSB 18CBL LI-402C (4935448463)
 | Outdated Product Product type: drill driver; Design: gun; Rotation speed (rpm): 550/2100; Max. beats (bpm): 27300; Torque: Max. torque (Nm): 75; with adjustment; Reducer: 2-speed; Number of speeds: 2; Reverse: slider; Weight (kg): 2.1; Chuck: bit holder and quick-release; Chuck diameter (mm): 13; Quick chuck change E-Catalog uses affiliate links compensated by our partners. |
AEG BSB 18CBL LI-402C | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog AEG 2026 - new arrivals, bestsellers, and the most relevant models AEG.
High torque, high speed, correct center of gravity placement (doesn't nose dive). The quick-release chuck is convenient, but the presence of significant play at the connection point negates all other advantages of the device. The weak chuck causes tools with a shank less than 8mm to spin in the chuck before the ratchet on the screwdriver activates. use AEG BSB 18CBL LI-402C few months |
Torque like that of a subcompact -Tavria- Design - speechless--- AEG. In operation, just like the entire company, it is a precise and balanced tool. I have the Ridgid version for the American market. When you hold it in your hands, it makes you think about the country you live in... use AEG BSB 18CBL LI-402C week i recommend it should buy |
Overload protection
The powerful AEG BSB 18CBL LI-402C screwdriver has a torque of 75 Nm, which allows you to drill holes in masonry up to 14 mm in diameter. The increased number of revolutions at the second speed (2100 rpm) is intended for hard materials and for drilling with crowns (for wood). Torque can be adjusted in 24 positions. At the same time, the motor itself is brushless, which increases its service life, as well as reduces energy consumption. The electronic engine protection is well organized in the model: when overloaded, the engine stalls sharply, and does not “tear”, trying to drill through what it cannot. The device is intended for constant use in repairs and construction and installation works.
Two chucks for drills and bits
Given the weight of the device at 2.1 kg, which is a lot, the manufacturer has provided an additional handle for more convenient drilling. It can be installed on either side, depending on whether the person is left-handed or right-handed. As in many modern professional models, there is a workplace illumination, which is useful when working in hard-to-reach places. To work with bits (hexagonal shanks), there is a special hexagon on the spindle, and the drills are installed in a quick-clamping (with three cams).
Two batteries with charging indicator
The screwdriver is equipped with two 4 Ah capacitive batteries. Pleased with the presence of an indication that shows the battery level. The body and handle are fully rubberized for ease of use. But there are no fasteners for a belt here, given that it is quite tiring to constantly carry a tool in your hands. Such a device costs a lot, but with constant use it will work in full.
I own a similar tool - the BS 18CBL - and have no problems with play; the chuck clamps significantly better, and it's also slightly cheaper. I bought both on the same day and had plenty of time for comparison. Don't fall for the quick-release chuck; in 90% of cases, it's not needed, and if you constantly need to work with alternating tools: drill/bit/tap, the best option is to buy a second or third screwdriver (just the body without the battery is sufficient).