1stPlayer X2-4R1 Color LED black
 | Outdated Product Relatively inexpensive gaming mini tower case. First of all, the model is distinguished by the presence of good pre-installed cooling, as well as attractive RGB lighting. The cooling system consists of 4 fans with a diameter of 120 mm, while the coolers are equipped with illumination. The chassis is adapted for a microATX motherboard. At the same time, there is enough space inside the case to install powerful hardware: a graphics system can take up to 310 mm in length, CPU cooling is limited to a height of 170 mm. The 1stPlayer X2-4R1 Colour LED gaming computer case has a high decorative value. Spectacular RGB lighting is complemented by the presence of glass panels. Tempered glass is provided for the assembly and front. The lower part of the body is separated by a casing. At the very bott...om there is a place for installing a power supply and two 3.5" drives. Additionally, there is room for another drive in the case, but with a 2.5" format case. A protective mesh from dust is installed on top, it is attached with a magnet. There are four slots for PCI expansion cards. The set of interfaces contains USB 2.0 (several), USB 3.0 (one), 3.5 mm headphone and microphone jacks. The case perfectly suits the role of a compact computer platform. The potential of this model is clearly beyond the low-cost segment. |
 |
Relatively inexpensive gaming mini tower case. First of all, the model is distinguished by the presence of good pre-installed cooling, as well as attractive RGB lighting. The cooling system consists of 4 fans with a diameter of 120 mm, while the coolers are equipped with illumination. The chassis is adapted for a microATX motherboard. At the same time, there is enough space inside the case to install powerful hardware: a graphics system can take up to 310 mm in length, CPU cooling is limited to a height of 170 mm.
The 1stPlayer X2-4R1 Colour LED gaming computer case has a high decorative value. Spectacular RGB lighting is complemented by the presence of glass panels. Tempered glass is provided for the assembly and front. The lower part of the body is separated by a casing. At the very bottom there is a place for installing a power supply and two 3.5" drives. Additionally, there is room for another drive in the case, but with a 2.5" format case. A protective mesh from dust is installed on top, it is attached with a magnet. There are four slots for PCI expansion cards. The set of interfaces contains USB 2.0 (several), USB 3.0 (one), 3.5 mm headphone and microphone jacks. The case perfectly suits the role of a compact computer platform. The potential of this model is clearly beyond the low-cost segment.
