The DHR series delivers Legendary Yamaha audio performance and professional-grade features in a highly affordable loudspeaker... more. The 10-inch 2-way 700W powered DHR10 is designed for fixed installations with rigging points for flying and a socket for pole mounting. A rotatable horn allows for either vertical or horizontal orientation with the UB-DXRDHR10 U-bracket (sold separately).The cabinet's bass-reflex design produces tight powerful bass that belies its compact stature and is perfectly complemented by a custom-selected 1.4" high-frequency driver for impressive full-range coverage. And there's no external amp required because the DHR10 has an integrated 700W Class-D amplifier to deliver all the power needed to make it sing.With plywood construction similar to the high-end CZR series, the DHR10 produces powerful, clear audio with minimal vibrations. What comes out is what you put in. Plus, the rugged polyurea finish will keep your cabinet looking good for years to come.Yamaha DHR10 Applications:Fixed installationsPublic addressClub live sound reinforcementYamaha DHR10 Features:Featuring a plywood cabinet that delivers a clear sound with minimal vibrationPlywood enclosure with a polyurea coating for a robust, scratch resistant surfaceCompact appearance thanks to a 10-inch LF driver that provides excellent low frequency responseCan be installed in a horizontal or vertical configuration with a rotatable HF horn offering the flexibility needed for installation in a wide range of environmentsOptional UB-DXRDHR10 U-bracket allows both for vertical or horizontal useA pole socket for use on a standRigging points for use with eye boltsPropitiatory FIR-X™ tuning, provides FIR filtering and corrective EQ, minimizing phase distortionYamaha DHR10 Specifications:Speaker type: 2-way, Bi-amped Powered Speaker, Bass-reflexFrequency range (-10dB): 52 Hz - 20 kHzCoverage area: H90? x V60? (Rotatable)Crossover: 1.9 kHz: FIR-X tuning™ (linear phase FIR filter)Maximum Output Level (Measured peak, IEC noise@1m): 128 dB SPLComponentsLF: Diameter: 10" cone, Voice Coil: 2", Magnet: FerriteHF: Diaphragm: 1.4", Type: 1" throat compression driver, Magnet: FerriteAmplifier class: Class-DPower ratingDynamic: 700 W (LF: 500 W, HF: 200 W) *1Continuous: 325 W (LF: 260 W, HF: 65 W)Cooling: Fan cooling, 4 speedsPower consumption: 60 W (1/8power), 18 W (Idle)Power requirements: 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 HzA/D D/A Converters: 24 bit 48 kHz SamplingProcessors: HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFFI/O connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)Cabinet material: PlywoodFinish: Durable Polyurea Painting, BlackHandle: Top x1Pole socket: Φ35 mm x1 (Bottom)Rigging: Top x 2, Rear x 1 (Fit for M10 x 30 - 50 mm Eyebolts)Floor Monitor Angle: N/ADimensionsW: 305 mm (12.0")H: 494 mm (19.5") (with rubber feet)D: 300 mm
Fullcompass.comDelivery: in USA
Report