USA
Catalog   /   Automotive   /   Parts & Car Electronics   /   Chargers & Jump Starters   /   Winso

Winso 139510

Photos - Charger & Jump Starter Winso 139510
Expecting restock
An inexpensive charger with an inverter control circuit and a microprocessor to ensure complete automation of the charging process. The device automatically selects the required charging process parameters for various types of lead-acid batteries. It works with WET/EFB, AGM and GEL batteries. The voltage at the battery terminals should be 12 V, and its capacity should be in the range from 4 to 150 Ah. Winso 139510 produces a maximum charging current of up to 6 A. A separate line in the model indicates the modes of plate desulfation, capacity restoration (RECOND) and power supply to 12-volt consumers (SUPPLY). For the winter, the device has an appropriate “cold weather” mode, which must be turned on at negative ambient temperatures. The model is equipped with one and a half meter power cabl...es with alligator clips. The charger's settings and operating modes are visualized by the on-board information display. The device body is protected from dust and moisture according to the IP65 standard - it is not afraid of dirt and water splashes from various directions. The device is powered by single-phase electrical networks with a standard alternating voltage of 230 V.
add to listmy lists
Winso 139510
Device
charger
Type
inverter
Battery compatibility
WET/EFB (Lead-Acid)
AGM
GEL
Battery voltage
12 V
Max. charging current
6 А
Current adjustment
automatic
Battery capacity 12V
4 – 150 Ah
Features
voltmeter
charging indicator
pulse repair (desulfation)
overcharge protection
winter charging mode
battery storage mode
12 V supply mode
IP code
IP65
Power source
230 V
Wire length
1.5 m
Added to E-Catalog
december 2023

An inexpensive charger with an inverter control circuit and a microprocessor to ensure complete automation of the charging process. The device automatically selects the required charging process parameters for various types of lead-acid batteries. It works with WET/EFB, AGM and GEL batteries. The voltage at the battery terminals should be 12 V, and its capacity should be in the range from 4 to 150 Ah.

Winso 139510 produces a maximum charging current of up to 6 A. A separate line in the model indicates the modes of plate desulfation, capacity restoration (RECOND) and power supply to 12-volt consumers (SUPPLY). For the winter, the device has an appropriate “cold weather” mode, which must be turned on at negative ambient temperatures. The model is equipped with one and a half meter power cables with alligator clips. The charger's settings and operating modes are visualized by the on-board information display. The device body is protected from dust and moisture according to the IP65 standard - it is not afraid of dirt and water splashes from various directions. The device is powered by single-phase electrical networks with a standard alternating voltage of 230 V.

How to choose a jump starters for a carCriteria for choosing a car booster for quick engine start and home convenience
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Winso 2024 - new products, best sales and most actual models Winso.
Filters
Winso 139510 often compared
RZTK SBT 400