USA

Willer IV 50R Ultra NHE

Photos - Boiler Willer IV 50R Ultra NHE
Outdated Product
Boiler with ultra-thin Slim tank. So, first of all, let’s pay attention to the fact that the outer diameter of the model’s body is only 27 cm. A combined heating element with a total power of 2 kW is used to heat water. Heat elements 1.3 and 0.7 kW can be switched on independently of each other. There are three performance levels: Min, Eco, Max. The heating temperature is adjusted using a rotary regulator. AISI316 stainless steel is used to make the tank. This grade of steel has increased resistance to running chlorinated water. The Willer IV 50R Ultra NHE water heating boiler is additionally protected by a magnesium anode. Heating elements have a classic open submersible design. Wet-type heating elements provide accelerated heating of water. A filled tank heats up from 20 to 60 °C in just...70 minutes. The pipeline connection is made from below. The receiving storage tank is equipped with a safety valve. There is double protection against overheating. The stainless steel tank has a long service life. Subject to regular use, the water tank is guaranteed to work for at least 5 years! The ultra-thin Slim body makes the water heater stylish and expressive. The boiler body is protected from moisture, IPX4. This model holds 50 liters. Weight is 16 kg.
add to listmy lists
Willer IV 50R Ultra NHE
Main
Typestorage
Energy sourcemains
Installationvertical
Tank volume50 L
Tank shapecylindrical
Technical specs
Power source230 V
Power consumption2000 W / 1300/700 W /
Tank liningstainless steel
Water supplywith pressure
Magnesium anode
Heating elements2
Heating element typewet heater
Features
Functionsthermostat
Safety systemsoverheat protection
safety valve
General specs
Controlsmechanical
Controls layoutbottom
Pipe connectionbottom
Tank manufacturer's warranty7 years
Dimensions (HxWxD)126x27x26.5 cm / weight - 16 kg /
Added to E-Catalogjune 2017

Boiler with ultra-thin Slim tank. So, first of all, let’s pay attention to the fact that the outer diameter of the model’s body is only 27 cm. A combined heating element with a total power of 2 kW is used to heat water. Heat elements 1.3 and 0.7 kW can be switched on independently of each other. There are three performance levels: Min, Eco, Max. The heating temperature is adjusted using a rotary regulator.

AISI316 stainless steel is used to make the tank. This grade of steel has increased resistance to running chlorinated water. The Willer IV 50R Ultra NHE water heating boiler is additionally protected by a magnesium anode. Heating elements have a classic open submersible design. Wet-type heating elements provide accelerated heating of water. A filled tank heats up from 20 to 60 °C in just 70 minutes.

The pipeline connection is made from below. The receiving storage tank is equipped with a safety valve. There is double protection against overheating. The stainless steel tank has a long service life. Subject to regular use, the water tank is guaranteed to work for at least 5 years! The ultra-thin Slim body makes the water heater stylish and expressive. The boiler body is protected from moisture, IPX4. This model holds 50 liters. Weight is 16 kg.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Willer 2024 - new products, best sales and most actual models Willer.
Filters
Models
(volume) 
31 – 50
Out of stock
Ultra NHE