Thermex IF 100 V pro (151 025)
 | Outdated Product Type: storage; Energy source: mains; Tank volume (L): 100; 2 tanks; Power source: 230 V; Power consumption (W): 2000; Magnesium anode; Heating elements: 2; wet heater; thermostat; overheat protection; frost protection; dry heating protection; electrical protection (RCD); safety valve; Pipe connection: bottom |
 |
Thermex IF 100 V pro | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Thermex 2024 - new products, best sales and most actual models Thermex.
Minimum space for maximum volume
The Thermex IF 100 V pro flat storage water heater is the top model of the line with two internal tanks with a total capacity of 100 L (50 + 50 L). Despite the impressive capacity, which is achieved due to the large height of 1240 mm, the device is quite compact: with a small width of 510 mm, it will protrude from the wall by only 290 mm, leaving a lot of free space. The drives of the device are made of high quality stainless steel and have a 7-year manufacturer's warranty. At the same time, the manufacturer sets the service life of the device for at least 9 years, subject to the conditions of installation, operation and maintenance.
Excellent display and control panel
The boiler is equipped with two copper heating elements with a total power of 2 kW, supplemented by a pair of magnesium anodes — one for each tank. Heating elements operate in 3-step mode: 0.7, 1.3 and 2 kW. Sufficiently high performance of heating elements when operating at maximum power allows heating full tanks by 45 °C above the incoming water temperature in just 157 minutes. It's really fast, given the considerable amount of storage. The convenient electronic control panel has a large digital display and built-in indicators of the main operating modes: anti-freeze, Economy (minimum heating), Optimal (standard heating) and Turbo (maximum heating).
Sturdy wall for secure mounting
Water connection pipes are located at the bottom of the boiler and require a vertical installation of the device. When choosing a place for wall mounting, take into account not only the device's own weight of 18.5 kg, but also the total weight of the water heater filled with water. The wall must be strong enough so that the anchor hooks can withstand such a large load. The device is designed to operate in the hydraulic pressure range from 0.5 bar to 7 bar.
