Thermex Combi ER 150 V (111 045)
 | Outdated Product Reliable and durable combined storage boiler with a capacity of 150 liters from one of the leading European manufacturers of household heating equipment. Designed for floor mounting in a vertical position. In addition to heating water with two built-in tubular electric heaters powered by the household power supply, the Thermex Combi ER 150 V can be combined with a domestic heating system (up to 5 bar at up to 110 °C) or with solar thermal systems (e.g. with flat solar collectors). The surface area of the built-in tubular spiral heat exchanger through which the hot coolant is 1.25 mm² is sufficient to transfer an impressive heat output (up to 30 kW). At a heating circuit temperature of 80 °C and a heating medium flow rate of 10 L/min, the full volume of the water heater is heated from 15 to...60 °C in about 15 minutes. The operation of two heating elements with a total power of 1500 W makes it possible to achieve the same result in about 5 hours. The inner surface of the steel tank is protected from contact with water by special heat-resistant enamel, and there is a large magnesium anode for additional electrochemical protection against corrosion. The heating temperature is controlled by a built-in thermostat. Impressive efficiency and low heat losses are provided by polyurethane foam insulation of considerable thickness. |
 |
Thermex Combi ER 150 V | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Reliable and durable combined storage boiler with a capacity of 150 liters from one of the leading European manufacturers of household heating equipment. Designed for floor mounting in a vertical position. In addition to heating water with two built-in tubular electric heaters powered by the household power supply, the Thermex Combi ER 150 V can be combined with a domestic heating system (up to 5 bar at up to 110 °C) or with solar thermal systems (e.g.
with flat solar collectors). The surface area of the built-in tubular spiral heat exchanger through which the hot coolant is 1.25 mm² is sufficient to transfer an impressive heat output (up to 30 kW). At a heating circuit temperature of 80 °C and a heating medium flow rate of 10 L/min, the full volume of the water heater is heated from 15 to 60 °C in about 15 minutes. The operation of two heating elements with a total power of 1500 W makes it possible to achieve the same result in about 5 hours.
The inner surface of the steel tank is protected from contact with water by special heat-resistant enamel, and there is a large magnesium anode for additional electrochemical protection against corrosion. The heating temperature is controlled by a built-in thermostat. Impressive efficiency and low heat losses are provided by polyurethane foam insulation of considerable thickness.
Before buying always check characteristics and configuration of product with online store manager
Catalog Thermex 2024 - new products, best sales and most actual models Thermex.
