Tenko KE 7.5/380 7.5 kW 400 H
 | Outdated Product With this electric boiler, the user will be able to organize high-quality heating, and, if necessary, also hot water supply on an area of up to 60 m². The heat exchanger uses a single-circuit design with the possibility of additionally connecting an indirect heating tank. The model does not have a circulation pump and an expansion tank, allowing the user to independently install the components, based on the characteristics of the thermal circuit. The Tenko KE 7.5/400 V electric heating boiler is equipped with an input for connecting a remote thermostat or programmer. If an external sensor is connected, the heat carrier heating will be adjusted automatically based on the room temperature. To power the heater, a three-phase network of 400 V is needed. A double heating element acts as a heat...element, heating is two-stage. The front panel is equipped with a pointer thermometer, and a capillary mechanical thermostat is also located there. An electric boiler will allow you to organize good heating without any smoke or soot. Such a model can be easily mounted even where there is no chimney system. The heater can be easily integrated into a heating circuit based on other sources of thermal energy. E-Catalog uses affiliate links compensated by our partners. |
With this electric boiler, the user will be able to organize high-quality heating, and, if necessary, also hot water supply on an area of up to 60 m². The heat exchanger uses a single-circuit design with the possibility of additionally connecting an indirect heating tank. The model does not have a circulation pump and an expansion tank, allowing the user to independently install the components, based on the characteristics of the thermal circuit.
The Tenko KE 7.5/400 V electric heating boiler is equipped with an input for connecting a remote thermostat or programmer. If an external sensor is connected, the heat carrier heating will be adjusted automatically based on the room temperature. To power the heater, a three-phase network of 400 V is needed. A double heating element acts as a heat element, heating is two-stage. The front panel is equipped with a pointer thermometer, and a capillary mechanical thermostat is also located there. An electric boiler will allow you to organize good heating without any smoke or soot. Such a model can be easily mounted even where there is no chimney system. The heater can be easily integrated into a heating circuit based on other sources of thermal energy.
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Tenko 2026 - new arrivals, bestsellers, and the most relevant models Tenko.
I recommend these for technical applications Heats 9 kW of an area of 150 m2. Not great in size. Not expensive. It’s already on the 5th day The click is already loud. The lights under the buttons light up steadily. I serviced it twice: once by dripping in the middle, once by burning out the temperature sensor. If the water boils with a low pressure in the system, and the thief does not turn on the boiler  Sergey Lanskiy: use Tenko KE 9.0/380 more than year |
Leaks from every joint. The terminals are not tightened. The contactor operates so loudly that it can be heard throughout the whole house! A classic of Ukrainian assembly at its worst. I do not recommend! No Leaking from every joint. The terminals are not tightened. The contactor is so loud you can hear it throughout the whole house! Classic Ukrainian assembly on a knee. I do not recommend it! |
Would consume a bit less electricity. It heats an even larger area than specified in the specifications. Weak wire from the outlet to the boiler itself. i recommend it should buy |