Tecware Nexus Evo black (TWCA-NEX-EVBK)
 | Outdated Product A relatively inexpensive mid-sized case that can serve as a good choice for building a gaming PC. Corresponds to the MidiTower form factor, any of the motherboards can be installed on the chassis: ATX, mATX, ITX. The model has a decent capacity. So, inside the system unit there is enough space to install a graphics adapter up to 350 mm long, and the processor tower can reach a height of 160 mm. The power supply is mounted in the lower compartment, which is covered with a metal casing. There is also a place to install a pair of HDD drives, two more 2.5 ″ SSD solid-state drives can be mounted on top of the protective casing of the power supply. The Tecware Nexus Evo case comes with three 120mm fans: two coolers are mounted on the front panel, another fan is located on the back. Additionally,...the top panel provides two more seats for 120 or 140 mm coolers. The front panel has a perforation covered with a fine mesh dust mesh. Here, on the front panel, there is an RGB LED strip. The backlight has 7 stationary colours and 7 effects, you can switch backlight modes using the button located at the base of the front panel. There are 7 PCI-E plugs at the back, and one of them (the top one) is reusable, but all the rest must be broken out. |
 |
A relatively inexpensive mid-sized case that can serve as a good choice for building a gaming PC. Corresponds to the MidiTower form factor, any of the motherboards can be installed on the chassis: ATX, mATX, ITX. The model has a decent capacity. So, inside the system unit there is enough space to install a graphics adapter up to 350 mm long, and the processor tower can reach a height of 160 mm.
The power supply is mounted in the lower compartment, which is covered with a metal casing. There is also a place to install a pair of HDD drives, two more 2.5 ″ SSD solid-state drives can be mounted on top of the protective casing of the power supply. The Tecware Nexus Evo case comes with three 120mm fans: two coolers are mounted on the front panel, another fan is located on the back.
Additionally, the top panel provides two more seats for 120 or 140 mm coolers. The front panel has a perforation covered with a fine mesh dust mesh. Here, on the front panel, there is an RGB LED strip. The backlight has 7 stationary colours and 7 effects, you can switch backlight modes using the button located at the base of the front panel. There are 7 PCI-E plugs at the back, and one of them (the top one) is reusable, but all the rest must be broken out.
