Sturm CS5012MS
 | Outdated Product A lightweight hand-held circular saw designed for cutting thin boards, such as parquet or laminate, and cutting sheet materials (plywood, MDF, fiberboard, chipboard, etc.). The device operates from the mains (power cable length 4 m) and weighs only 2.7 kg. The Sturm CS5012MS circular saw is equipped with a 1000 W motor. At idle (no load), the motor spins the saw blade up to 4500 rpm. This tool can work with serrated saw blades with a diameter of 125 mm (bore size 22 mm), and the use of equipment with a diameter of 115 mm and 120 mm is also allowed. A special feature of this model is the location of the disc on the left (this way the cutting lines are better visible during operation). The maximum cutting depth reaches 48 mm (when making bevel cuts at 45°, you can cut materials up to 32 mm t...hick). The design of the tool allows you to adjust the depth of cut and the angle of inclination of the sole (up to 45°), made of stamped metal. The kit includes one carbide saw blade with 48 teeth. |
 |
Sturm CS5012MS | ||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||
A lightweight hand-held circular saw designed for cutting thin boards, such as parquet or laminate, and cutting sheet materials (plywood, MDF, fiberboard, chipboard, etc.). The device operates from the mains (power cable length 4 m) and weighs only 2.7 kg. The Sturm CS5012MS circular saw is equipped with a 1000 W motor. At idle (no load), the motor spins the saw blade up to 4500 rpm.
This tool can work with serrated saw blades with a diameter of 125 mm (bore size 22 mm), and the use of equipment with a diameter of 115 mm and 120 mm is also allowed. A special feature of this model is the location of the disc on the left (this way the cutting lines are better visible during operation). The maximum cutting depth reaches 48 mm (when making bevel cuts at 45°, you can cut materials up to 32 mm thick). The design of the tool allows you to adjust the depth of cut and the angle of inclination of the sole (up to 45°), made of stamped metal. The kit includes one carbide saw blade with 48 teeth.
Before buying always check characteristics and configuration of product with online store manager
Catalog Sturm 2024 - new products, best sales and most actual models Sturm.
