Ryobi R18AG7-140S (5133004231)
 | Outdated Product Type: angle grinder; Power source: battery; Rotation speed (rpm): 11000; Max. disc diameter (mm): 125; case; Battery in set: 1; Battery voltage (V): 18; Battery capacity (Ah): 4; Noise level (dB): 91; Weight (kg): 2.9; E-Catalog uses affiliate links compensated by our partners. |
We recommend products in stockGrinders & Polishers Ryobi →
angle grinder, cordless, saw blade 125 mm, 11000 rpm, keyless change, motor protection, kickback protection, additional handle, case, charger
angle grinder, cordless, saw blade 125 mm, 8600 rpm, soft start, additional handle, case
angle grinder, cordless, saw blade 115 mm, 8500 rpm, soft start, additional handle, case
angle grinder, cordless, saw blade 115 mm, 8500 rpm, motor protection, additional handle, charger
angle grinder, cordless, saw blade 125 mm, 8500 rpm, motor protection, kickback protection, additional handle, case
Ryobi R18AG7-140S | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
R18AG7-0 comes without battery, charger and bag, R18AG7-140S comes with one battery (4Ah), charger and bag
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Ryobi 2026 - new arrivals, bestsellers, and the most relevant models Ryobi.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Ryobi 2026 - new arrivals, bestsellers, and the most relevant models Ryobi.
How to choose an angle grinderBrief instructions for choosing a grinder
How does an expensive grinder differ from a cheap one?Design features and other factors affecting the quality and price of an angle grinder
Series Ryobi ONE+ (cordless)
cordless, without battery, 22 bar, nozzles: universal 3 in 1, water suction, weight 1.8 kg
drill driver, gun, 500/1800 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H, 4 Ah, 2, case
hammer drilling, 5000 bpm, without a hit, 1300 rpm, chiselling, 1.3 J, power battery, 18 В, not included, LED light, weight 1.65 kg
oil-free, cordless, no battery, at the entrance 50 L/min, 8.3 bar, receiver: 4 L, direct drive
contact soldering iron, with cordless battery, without battery, from 205, up to 480 °C, nozzles x2, solder
kit: drill driver, electric jigsaw, angle grinder, delta sander, charger, bag, bit, blade, disc, 5 sanding sheets, battery: 2, 2 Ah, 5 Ah, 18 В
impact wrench, gun, 2100/2500/2900 rpm, cartridge: square drive, 1/2 ", impact mode, reverse, motor brake, power supply: battery, 18 H, 2 Ah, 1, case
angle grinder, cordless, without battery, saw blade 125 mm, 11000 rpm, keyless change, motor protection, kickback protection, additional handle
kit: drill driver, electric jigsaw, angle grinder, charger, bag, bit, cloth, disk, battery: 2, 2 Ah, 5 Ah, 18 В
drill driver, gun, brushless motor, 410/1800 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, motor brake, power supply: battery, 18 H
Not a good model. It does not have a grid on the air intake for cooling, and the holes themselves are poorly located. They are located between the grip of the hand and the casing of the disc. The air flow pulls with it the particles formed from sawing and they fall on the board and into the engine and settle on the rotor, which is a magnet. As a result, these metal particles corrode inside the engine and on the board. When these particles are collected in sufficient quantities, and this is not a long period of time, it is possible for the rotor to come into contact with the stator through the particles. Just compare at least with Makita and you will understand everything yourself Quick release shroud, low cost, quick clamping nut, high idle. Manufacturer's design flaws that affect the service life. The board often fails. The service acknowledges that there are problems with the boards.  Alexander Chuklinov: use Ryobi R18AG7-0 month or more i recommend it don't buy |
Not a good model. It does not have a grid on the air intake for cooling, and the holes themselves are poorly located. They are located between the grip of the hand and the casing of the disc. The air flow pulls with it the particles formed from sawing and they fall on the board and into the engine and settle on the rotor, which is a magnet. As a result, these metal particles corrode inside the engine and on the board. When these particles are collected in sufficient quantities, and this is not a long period of time, it is possible for the rotor to come into contact with the stator through the particles. Just compare at least with Makita and you will understand everything yourself Quick release housing, low price, quick locking nut, high idle speed Manufacturer's design flaws that affect the lifespan. The board frequently fails. The service acknowledges that there are issues with the boards. use Ryobi R18AG7-0 month or more i recommend it don't buy |
If you buy it, immediately wrap all the holes with tape, it will get on the board and burn out as a result. I don’t know about maintainability, I’ll check. good power burned out on the first day of work |
Add Review
Ryobi R18AG7-140S configurations
| Price for Ryobi R18AG7-140S | ||||
|---|---|---|---|---|
 | Ryobi R18AG-120S | from $304.31 | 1 offer | |
 | Ryobi R18AG7-0 | from $374.02 | 1 offer | |
Video reviews
Ryobi brushless grinder v brushed grinder R18AG7-0 and R18AG-0
27 December 202052 339 view
Ryobi ONE+ Brushless Angle Grinder R18AG7-0
4 July 201729 510 view
RYOBI: 18V ONE+ Angle Grinder (R18AG7-0) reviewed by Barry Du Bois
7 March 20185 048 view
Ryobi Battery 4.5" grinder R18AG7-0 on test
17 July 20203 167 view