USA

QSC AD-C4T

Photos - Speakers QSC AD-C4T
QSC AD-C4T
Colour
Featuresinformation
Mountembedded
Specs
Typepassive
Number of channels1.0 / 2.0 – depending on configuration /
Number of speakers1
Number of bands1
Power / frequency
Total rated power16 W
Overall frequency range70 – 16000 Hz / -6 дБ /
Design
Design featuresphase inverter front
General
Midrange speaker size102 mm
Front speaker dimensions (HxWxD)21.4x21.4x20.1 cm
Mounting dimensions (HxWxD)18.6x18.6x20.1 cm
Weight2.2 kg
Added to E-Catalognovember 2015
Music quest: How to choose speaker system and not missKey criteria for choosing speaker system: what you need to know to buy best speakers for your requirements
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog QSC 2024 - new products, best sales and most actual models QSC.

Buy QSC AD-C4T

When you make a purchase through links on our site, we may earn an affiliate commission.

QSC AD-C4T Ceiling Speaker, 70/100V - White AD-C4T-QSC

The QSC AD-C4T is a ceiling speaker with consistent tonal characteristics across the entire AcousticDesign™ family in both surface or ceiling applications. The AD-C4T features DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area.Note:This item is priced as each but sold in pai... morers. For more information please contact your Full Compass Sales Pro.FeaturesConsistent tonal characteristics across the entire Acousticm Design™family in both surface or ceiling applicationsDMT (Directivity Matched Transition™) wave guide ensures smooth, uniformfrequency response over the coverage areaSnap-fit magnetic grille3x double stepped, long travel dog-ear blind mount systemAdvanced Intrinsic Correction™ voicings available via Q-SYS™ networkedaudio processing platforms, including CXD amplifiersLow-saturation and low-loss 70/100V transformers with 16 Ohm bypassBlemish-free removable logoRemovable conduit cover plate, also available as accessory for pre-installwiringSpecificationsEffective frequency range: 60 Hz – 20 kHzRated noise power / voltage: 30 watts / 22 volts(rms)Sensitivity [dB]: 87.5Rated coverage (-6 dB): 150° conical DMTMaximum peak SPL [dB]: 108Nominal impedance [ohms]: 16Recommended amplifier: 60 wattsLF transducer: 114 mm [4.5 in] weather resistan tpaper cone wooferHF transducer: 25 mm [1 in] aluminum dome tweeterInput connector type: Euroblock connector with parallel outputEnclosure material: ABS baffle on powder coated steel back canGrille material: Powder coated steelIngress protection: IP-54Operating environment: Designed for indoor useOperating temperature range: -20 to 50° C (-4 to 122°F)Cutout dimension: Ø 195 mm (Ø 7.68 in)Net weight: 2.9 kg (6.4 lb)Product dimensions (Diameter x Height): Ø 230 x 176mm (Ø 9.06 x 6.93 in.)Shipping weight: 9.3 kg [20.5 lb] (pair packed)Shipping dimensions (H x W x D): 279 x 711 x 318 mm[11 x 28 x 12.5 in](pair packed)Included accessories: C-ring and tile rails, rail screws,euroblockconnector, cut-out template, grille QSC AD-C4T Ceiling Speaker, 70/100V - White.
Fullcompass.com
Delivery: in USA
Report
$205.00

QSC AD-MR4 Flanged Mud Ring For AD-C4T Ceiling Speaker

The AD-MR4 is a flanged mud ring for pre-installation of QSC's AD-C4T ceiling speaker in sheetrock or plaster surfaces. QSC AD-MR4 Flanged Mud Ring For AD-C4T Ceiling Speaker.
Fullcompass.com
Delivery: in USA
Report
$182.00

QSC AD-C4T-ZB-WH 4.5 2-Way Ceiling Speakers, 70/100V, White

The Q-SYS AcousticDesign™ AD-C4T-ZB is a 4.5” two-way, zero-bezel ceiling loudspeaker ideal for various foreground and background sound reinforcement applications using 70/100V or 16Ω bypass configurations.The AcousticDesign™ Series provides integrators with a premium installed sound solution that prioritizes performance, co... morensistent coverage, and aesthetics. Designed to maintain a consistent tonal characteristic across ceiling, surface, and pendant applications, the series allows seamless transitions within blended installations.The AD-C4T-ZB features a high-quality 4.5” weather-treated paper cone woofer with a 1” voice coil and a .75” aluminum dome tweeter on a DMT waveguide. Q-SYS’s DMT (Directivity Matched Transition™) design philosophy ensures a coherent transition between transducers, providing consistent 150° conical coverage.In 70/100V applications, the AD-C4T-ZB maintains accurate frequency response through a low-loss, low-saturation 30-watt transformer with selectable taps, including 16Ω bypass, controlled by a rotary selector under the snap-fit magnetically attached powder-coated steel grille.The rugged ABS baffle is protected by UV inhibitors to prevent discoloration, and the speaker features a powder-coated steel back can for lasting durability. The magnetic grille includes a removable stick-on logo for installations where branding is not permitted.Installers benefit from the 3x double-stepped, long-travel dog-ear blind mounting system, accommodating ceiling thicknesses from 0” to 2.25”. The conduit cover plate is easily accessible by loosening a single captive Phillips screw, allowing access to the locking 4-pole Euro-block connector, which accepts up to four 18AWG pairs and simplifies star topology wiring designs.Intrinsic Correction™ voicings optimize performance and streamline installation, easily deployed via the Q-SYS Platform, including CX-Q Series amplifiers.QSC AD-C4T-ZB-WH Applications:Transportation hubsTraditional houses of worshipMuseumsRetail spaces and concoursesGovernment buildingsLecture theatresConference facilitiesHotel ballroomsCorporate HQ atriaQSC AD-C4T-ZB-WH Includes:QSC AcousticDesign 4.5" 2-Way Zero-Bezel Ceiling Loudspeaker1 x C-RingsTile RailsRail Screws1 x Euroblock Connectors1 x Cut-Out Templates1 x GrillesLimited 3-Year Manufacturer WarrantyQSC AD-C4T-ZB-WH Features:Zero-bezel design for the needs of modern applicationsConsistent tonal characteristics across the entire AcousticDesign Series for surface, ceiling, and pendant applicationsDMT (Directivity Matched Transition) waveguide ensures smooth, uniform frequency response over the coverage areaSnap-fit magnetic grille3 x double stepped, long travel dog-ear blind mount systemIntrinsic Correction voicings available via the Q-SYS Platform including CX-Q amplifiersBlemish-free removable logoRemovable conduit cover plate, also available as accessory for pre-install
Fullcompass.com
Delivery: in USA
Report
$215.00

QSC AD-C4T Ceiling Speaker, 70/100V - Black AD-C4T-QSC

The QSC AD-C4T is a ceiling speaker with consistent tonal characteristics across the entire AcousticDesign™ family in both surface or ceiling applications. The AD-C4T features DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area.Note:This item is priced as each but sold in pai... morers. For more information please contact your Full Compass Sales Pro.FeaturesConsistent tonal characteristics across the entire Acousticm Design™family in both surface or ceiling applicationsDMT (Directivity Matched Transition™) wave guide ensures smooth, uniformfrequency response over the coverage areaSnap-fit magnetic grille3x double stepped, long travel dog-ear blind mount systemAdvanced Intrinsic Correction™ voicings available via Q-SYS™ networkedaudio processing platforms, including CXD amplifiersLow-saturation and low-loss 70/100V transformers with 16 Ohm bypassBlemish-free removable logoRemovable conduit cover plate, also available as accessory for pre-installwiringSpecificationsEffective frequency range: 60 Hz – 20 kHzRated noise power / voltage: 30 watts / 22 volts(rms)Sensitivity [dB]: 87.5Rated coverage (-6 dB): 150° conical DMTMaximum peak SPL [dB]: 108Nominal impedance [ohms]: 16Recommended amplifier: 60 wattsLF transducer: 114 mm [4.5 in] weather resistan tpaper cone wooferHF transducer: 25 mm [1 in] aluminum dome tweeterInput connector type: Euroblock connector with parallel outputEnclosure material: ABS baffle on powder coated steel back canGrille material: Powder coated steelIngress protection: IP-54Operating environment: Designed for indoor useOperating temperature range: -20 to 50° C (-4 to 122°F)Cutout dimension: Ø 195 mm (Ø 7.68 in)Net weight: 2.9 kg (6.4 lb)Product dimensions (Diameter x Height): Ø 230 x 176mm (Ø 9.06 x 6.93 in.)Shipping weight: 9.3 kg [20.5 lb] (pair packed)Shipping dimensions (H x W x D): 279 x 711 x 318 mm[11 x 28 x 12.5 in](pair packed)Included accessories: C-ring and tile rails, rail screws,euroblockconnector, cut-out template, grille QSC AD-C4T Ceiling Speaker, 70/100V - Black.
Fullcompass.com
Delivery: in USA
Report
$205.00
Filters