USA

PowerWalker VI 1000 CSW 1000 VA (10121112)

Photos - UPS PowerWalker VI 1000 CSW 1000 VA
Photos 3
Outdated Product
Household uninterruptible power supply for backup power of small household appliances, such as computers, TVs and audio systems. The device has an effective power of 600 watts. Inside the case is a 12-volt battery with a capacity of 10 Ah. There are four sockets on the rear surface of the PowerWalker VI 1000 CSW UPS (two of them are battery-backed and can power electricity consumers for some time in the absence of mains voltage), and on the front panel there are two USB A ports that can be used to recharge phones and gadgets. The uninterruptible power supply outputs current with a “correct” sine wave, which is necessary to power some sensitive devices, such as expensive audio systems or gas boiler pumps. The UPS operates almost silently.
add to listmy lists
PowerWalker VI 1000 CSW 1000 VA
Main
Typesmart
Form factorstandard (Tower)
Full load operating time2.18 min
Half load operating time7 min
Switching to battery6 ms
Input
Input voltage1 phase (230V)
Input voltage range170 – 280 V
Bypass (direct connection)is absent
Output
Output voltage1 phase (230V)
Peak output power1000 VA
Rated output power600 W
Efficiency98.4 %
Output waveformsinusoid (PSW)
Output frequency50/60 Hz
Redundant sockets2
Non-redundant sockets2
Socket typetype F (Schuko)
Charging USB A ports2 / 2.1 А /
Battery
Total battery capacity10 Ah
Number of batteries1
Full charge time480 min
Protection
Protectionshort circuit protection
overload protection
noise filtering
data line protection
sound alarm
Fuseauto
Control interfacesUSB
General
Screen
Operating temperature0 – 40 °C
Noise level40 dB
Dimensions (HxWxD)280x99x288 mm
Weight8.5 kg
Added to E-Catalogfebruary 2020
P/N
10121112

Interactive UPS. Correct sinusoid. 2 USB A ports. Quiet operation.

Household uninterruptible power supply for backup power of small household appliances, such as computers, TVs and audio systems. The device has an effective power of 600 watts. Inside the case is a 12-volt battery with a capacity of 10 Ah. There are four sockets on the rear surface of the PowerWalker VI 1000 CSW UPS (two of them are battery-backed and can power electricity consumers for some time in the absence of mains voltage), and on the front panel there are two USB A ports that can be used to recharge phones and gadgets. The uninterruptible power supply outputs current with a “correct” sine wave, which is necessary to power some sensitive devices, such as expensive audio systems or gas boiler pumps. The UPS operates almost silently.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog PowerWalker 2024 - new products, best sales and most actual models PowerWalker.
Filters
PowerWalker VI 1000 CSW often compared
PowerWalker VI 1000 CSW FR