USA

NAD C356DAC

Photos - Amplifier NAD C356DAC
Videos 8Photos 8
Outdated Product
Device type: integrated amplifier; Element base: transistor; Number of channels: 2; Frequency range (Hz): 20 – 20000; Power per channel, 8 ohms (W): 80; Signal to noise ratio (dB): 106; Signal-to-noise ratio (Main), dB: 120; Signal-to-noise ratio (Phono MM/MC), dB: 75/78; Damping factor: 100
add to listmy lists
NAD C356DAC
Type:integral
Number of channels:2
Power per channel (8 ohms):80 W
Coef. damping:100
To amplifier (Main):RCA
Inputs:optical, USB
RCA inputs:7 steam(а)
Outputs:Pre-Amp
REC outputs:2 steam(а)
All specifications
Specifications C356DAC
Colour
Device typeintegrated amplifier
Element basetransistor
Toroidal transformer
Amplifier parameters
Number of channels2
Frequency range20 – 20000 Hz / ±0,3 дБ /
Power per channel (8Ω)80 W
Signal to noise ratio106 dB
Signal-to-noise ratio (Main)120 dB
Signal to noise ratio (Phono MM/MC)75/78 dB
Damping factor100
Harmonic distortion0.007 %
Channel sensitivity / impedance
Line input166 mV
22 kOhm
Main input0.95 V
20 kOhm
Phono MM/MC18/1.6 mV
47/0.1 kOhm
REC output1 kOhm
Preout0.08 kOhm
Connectors
InputsUSB B
optical
RS-232
control input (IR)
To amplifier (Main)RCA
RCA7 pairs
OutputsPre-Amp / two pairs /
control output (IR)
For acoustics4 шт
REC (to recorder)2 pairs
Trigger output1 шт
Front panelindicators
audio input jack / Aux 3.5mm /
headphone output
Features
Adjustmentsbass control
treble adjustment
balance adjustment
level adjustment
More featuresBy-pass/Direct
additional speaker connect
Bi-Wiring
external devices control
General
Remote control
PSUinternal
Power consumption350 W
Standby consumption0.5 W
Dimensions (WxDxH)435х337х131 mm
Weight8.7 kg
Added to E-Catalogseptember 2017
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog NAD 2024 - new products, best sales and most actual models NAD.
Video reviews
Model modifications:
    The classic model of the amplifier is not equipped with either a phono stage module or a DAC. MDC design allows you to add one of the modules to the amplifier. Usually this is done at the factory, so amplifiers in stores may already be sold with a built-in DAC or phono stage.
Filters