USA

NAD C356BEE

Photos - Amplifier NAD C356BEE
Videos 8Photos 8
Outdated Product
$888.00 up to $1,402.52
Mid-level amplifier with a rated output power of 80 watts per channel when connecting acoustics with an impedance of 8 ohms. The set of ports has 4 pairs of speaker outputs, a turntable connector and a dedicated preamp output. Depending on the modification, an optical port and a USB port may also be present. It is worth noting that the classic model comes without phono stage and DAC modules, which you can easily deliver yourself, but this issue must be clarified before purchase.
add to listmy lists
NAD C356BEE
Type:integral
Number of channels:2
Power per channel (8 ohms):80 W
Coef. damping:100
To amplifier (Main):RCA
RCA inputs:7 steam(а)
Outputs:Pre-Amp
REC outputs:2 steam(а)

Mid-level amplifier with a rated output power of 80 watts per channel when connecting acoustics with an impedance of 8 ohms. The set of ports has 4 pairs of speaker outputs, a turntable connector and a dedicated preamp output. Depending on the modification, an optical port and a USB port may also be present. It is worth noting that the classic model comes without phono stage and DAC modules, which you can easily deliver yourself, but this issue must be clarified before purchase.

All specifications
Specifications C356BEE
Main
Device typeintegrated amplifier
Element basetransistor
Toroidal transformer
Amplifier parameters
Number of channels2
Frequency range20 – 20000 Hz / ±0,3 дБ /
Power per channel (8Ω)80 W
Signal to noise ratio106 dB
Signal-to-noise ratio (Main)120 dB
Signal to noise ratio (Phono MM/MC)75/78 dB
Damping factor100
Harmonic distortion0.007 %
Channel sensitivity / impedance
Line input166 mV
22 kOhm
Main input0.95 V
20 kOhm
Phono MM/MC18/1.6 mV
47/0.1 kOhm
REC output1 kOhm
Preout0.08 kOhm
Connectors
InputsRS-232
control input (IR)
To amplifier (Main)RCA
RCA7 pairs
OutputsPre-Amp / two pairs /
control output (IR)
For acoustics4 шт
REC (to recorder)2 pairs
Trigger output1 шт
Front panelindicators
audio input jack
headphone output
Features
Adjustmentsbass control
treble adjustment
balance adjustment
level adjustment
More featuresBy-pass/Direct
additional speaker connect
Bi-Wiring
external devices control
General
Remote control
PSUinternal
Power consumption350 W
Standby consumption0.5 W
Dimensions (WxDxH)435х337х131 mm
Weight8.7 kg
Added to E-Catalogjanuary 2014
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog NAD 2024 - new products, best sales and most actual models NAD.
Video reviews
Model modifications:
    The classic model of the amplifier is not equipped with either a phono stage module or a DAC. MDC design allows you to add one of the modules to the amplifier. Usually this is done at the factory, so amplifiers in stores may already be sold with a built-in DAC or phono stage.
Filters