Makita DF0300
 | Outdated Product $181.44 Two-speed non-percussive handheld pistol drill/driver with mains power and increased torque (up to 56 Nm). It features compact size, relatively low weight (compared to battery models) and good proprietary ergonomics. The manufacturer is positioned as a model of the middle price category, focused on active domestic and professional use. Confidently handles with the performance of serial assembly, assembly-dismantling, construction and finishing works. The Makita DF0300 drill driver is equipped with a high-quality 320 W commutator motor with an air-cooled system and a planetary gearbox with durable steel, which can spin the chuck up to a maximum of 1500 rpm. Two speed ranges allow you to choose the optimal mode for drilling the widest range of materials. It can drill holes in structural stee...ls (up to 10 mm in diameter), non-ferrous metals, their alloys, polymeric materials and composites based on them, as well as wood (up to 28 mm). The tool is equipped with a convenient keyless chuck that allows you to quickly, literally with one hand, change equipment with shanks up to 10 mm in diameter. Includes reverse switch, switch lock, electronic speed control (integrated into the switch trigger mechanism) and a long (2.5 m) power cable. |
 |
Makita DF0300 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Two-speed non-percussive handheld pistol drill/driver with mains power and increased torque (up to 56 Nm). It features compact size, relatively low weight (compared to battery models) and good proprietary ergonomics. The manufacturer is positioned as a model of the middle price category, focused on active domestic and professional use. Confidently handles with the performance of serial assembly, assembly-dismantling, construction and finishing works.
The Makita DF0300 drill driver is equipped with a high-quality 320 W commutator motor with an air-cooled system and a planetary gearbox with durable steel, which can spin the chuck up to a maximum of 1500 rpm. Two speed ranges allow you to choose the optimal mode for drilling the widest range of materials. It can drill holes in structural steels (up to 10 mm in diameter), non-ferrous metals, their alloys, polymeric materials and composites based on them, as well as wood (up to 28 mm). The tool is equipped with a convenient keyless chuck that allows you to quickly, literally with one hand, change equipment with shanks up to 10 mm in diameter. Includes reverse switch, switch lock, electronic speed control (integrated into the switch trigger mechanism) and a long (2.5 m) power cable.
Before buying always check characteristics and configuration of product with online store manager
Catalog Makita 2024 - new products, best sales and most actual models Makita.
The undisputed leader
Makita is perhaps the only eminent manufacturer among those who produce corded screwdrivers. And Makita DF0300 fully justifies the good reputation of the brand. This model cannot be called “low-cost” (the price of a screwdriver is about one and a half to two times higher than that of a similar power tool from the middle price category), but it is still much cheaper than cordless screwdrivers of the same brand.
Quality 5+
Makita brand quality is felt in every detail. The comfortable handle is wrapped in a rubberized coating. The rubberized wire is quite flexible and at the same time not at all thin. The handle has holes for attaching a clip.
The screwdriver is shorter and lighter than most competitors. The difference of 100 – 200 g at first glance may seem insignificant, but if you work for several hours in a row, then the sensations will be completely different.
At the first speed, the torque reaches 56 Nm (this is a large value; at maximum tightening forces, the tool should be held firmly with both hands so that it does not break out of the palms). Therefore, the screwdriver easily twists thick self-tapping screws and large capercaillie. To work with small fasteners, there is an adjusting clutch for 20 positions, which limits the tightening force. To cope with the high torque, all the gears of the 2-speed reducer are made of metal (many screwdrivers have plastic gears).
Corded screwdriver for professionals
The cost of the Makita DF0300 screwdriver is quite justified. This is a professional tool designed for intensive use at a construction site or in an enterprise that manufactures furniture or wooden structures. And in the hands of ordinary household users, a screwdriver will be almost eternal. You just need to buy quality bits that can withstand high torque without "licking" the working edges.
