JBL Control 67 HC/T

The Control 67P/T is a high output, full-range, two-way pendant-type loudspeaker that provides superb sound reproduction and very consistent, wide coverage for rooms with open architecture ceilings and other locations where a pendant form factor is desired. JBL’s patent-pending Radiation Boundary Integrator®(RBI) technology, adapted from the ground... morebreaking VERTEC™ Series of line array loudspeakers, delivers consistent coverage of the listening area. Combining an extra-large 280 mm (11 in) diameter waveguide with low-frequency projection apertures, the two coaxially-mounted drivers provide a seamless integration of coverage, resulting in extremely even pattern control and coverage where all listeners hear a consistent, high-fidelity sound quality. The wide 120°coverage pattern allows for the use of fewer speakers, reducing the cost of the installed system without sacrificing performance. The Control 67P/T contains a high-quality 60 Watt multi-tap transformer for use on 70V/100V distributed loudspeaker lines, and is switchable for 8-ohm voice-coil direct operation.

The JBL Control Contractor 60 Series Pendant loudspeakers offer outstanding coverage for rooms with open architecture or high-ceilings and also provide excellent voice and music clarity for venues with difficult acoustics. The proprietary conical Radiation Boundary Integrator combines a large diameter high-frequency waveguide with low-frequency pro... morejection apertures that work in tandem to provide an integration of coverage between the two coaxially-mounted drivers. The result is even pattern control and coverage, where all listeners hear a consistent flat, frequency response.The Control 67 HC/T is an ultra-compact mid-high satelittle pendant speaker is great for speech and mid-high music applications.FeaturesWell-controlled 75° coverage for clarity in high-ceiling and reverberant locations6.5" (165mm) low-frequency with silk-dome tweeter for outstanding sonic fidelityHigh 93 dB sensitivity75 Watts, 8 ohms and 60W multi-tap transformerSpeaker comes with full grilleSpecificationsFrequency Response (-10 dB): 75 Hz – 17 kHzFrequency Range (±3 dB): 110 Hz – 16 kHzPower Capacity: 75 Watts Continuous Pink Noise Power (with 300 Watts peaks) 150 Watts Continuous Program PowerNominal Sensitivity: 93 dBNominal Coverage Angle: 75° (+15°/-20°)Directivity (Q): 10.4Directivity Index (DI): 9.8 dBRated Maximum SPL @ 1m: 112 dB continuous pink noise,118 dB peakRated Impedance: 8 ohmsTransformer Taps:70V: 60W, 30W, 15W & 7.5W100V: 60W, 30W, 15WTransformer Insertion Loss: 0.5 dB @ 7.5 W, 0.5 dB @ 15W, 0.6 dB @ 30 W, 0.7 dB @ 60 WLF Driver: 165 mm (6.5") polypropylene-coatedpaper with pure butyl rubber surround, 25 mm (1") copper voice coil, vented fiberglass resin voice coil-formerHF Driver: 25 mm (1") textile soft-dome, neodymium magnet assembly, ferro-fluid cooling, aluminum voice coil formerEnclosure Material: High-impact polystyreneGrille: Zinc-plated steel grille with powder-coatfinish, foam backing (removable for painting)Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splashproof rating.Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m(15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire ropesuspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 andUL2239, TUV, and CSA Class 3426-01 & Class 3426-81.Dimensions: 13.1"