Intertool AT-3025

Multi-purpose charger for the lion's share of common types of batteries. Intertool AT-3025 is designed for use with lead-acid, gel and absorbent glass fiber batteries (AGM type). The device works with batteries 12 / 24 V with a capacity of 2.2 to 200 Ah. The charger's internal microcontroller automatically detects the status of the connected battery and calculates the required charging parameters (voltage, charging current).

The 10-stage cycle allows you to charge the battery to almost 100% capacity. It is supposed to control the parameters of the device operation according to the readings on the info display. The buttons on the control panel set the type of battery and select the strength of the charging current (2 / 6 / 10 A). Also in the model there is a recovery mode for deeply discharged batteries - when it is activated, sulfate is cleared from the battery plates. The charger is powered by a standard 230 V household power supply. The wires with alligator-type terminals are non-removable for the model, their length is about 1.8 m. The device weighs a little more than 1 kg. For the convenience of carrying it by hand, an ergonomic handle is attached to the body of the device, which is located on the top panel.