USA

Hotpoint-Ariston PRO1 R 50 V 1.5 K PL DRY

Photos - Boiler Hotpoint-Ariston PRO1 R 50 V 1.5 K PL DRY
Outdated Product
A storage type water heater with a relatively low cost and good technical characteristics. The main feature of the model is efficiency — thanks to a thick layer of thermal insulation, the model boasts minimal heat loss. At the same time, the maximum operating temperature reaches 75 °C and is maintained by a thermostat. The device uses a “dry” heating element, the shell of which does not allow scale to build up, so that the efficiency of the model does not decrease, and dismantling does not cause difficulties, so the Hotpoint-Ariston PRO1 R 50 V 1.5 K PL DRY boiler is serviced easily and quickly. A 50-liter tank with a five-year warranty is covered inside with heat-resistant enamel and is additionally protected from excess pressure, as well as the appearance of rust spots due to electrochem...ical processes suppressed by an anode of actively reacting magnesium. The cylindrical body is attached to the wall in a vertical position, pipes are connected from below, and the whole system does not particularly clutter up the usable space of a bathroom or a heated utility room.
add to listmy lists
Hotpoint-Ariston PRO1 R PL DRY [R 50 V 1.5 K]
Hotpoint-Ariston PRO1 R 50 V 1.5 K PL DRY
Main
Typestorage
Energy sourcemains
Installationvertical
Tank volume50 L
Tank shapecylindrical
Technical specs
Power source230 V
Power consumption1500 W
Max. water temperature80 °C
Heat loss0.99 kWh/24h
Tank liningenamel
Water supplywith pressure
Heating time102 min / at ∆t=45 °C /
Magnesium anode
Heating elements1
Heating element typedry heater
Features
Functionsthermostat
Safety systemsoverheat protection
safety valve
General specs
Controlsmechanical
Controls layoutbottom
Pipe connectionbottom
Tank manufacturer's warranty5 years
Dimensions (HxWxD)54.3x45x48 cm
Weight16 kg
Added to E-Catalogseptember 2019

A storage type water heater with a relatively low cost and good technical characteristics. The main feature of the model is efficiency — thanks to a thick layer of thermal insulation, the model boasts minimal heat loss. At the same time, the maximum operating temperature reaches 75 °C and is maintained by a thermostat. The device uses a “dry” heating element, the shell of which does not allow scale to build up, so that the efficiency of the model does not decrease, and dismantling does not cause difficulties, so the Hotpoint-Ariston PRO1 R 50 V 1.5 K PL DRY boiler is serviced easily and quickly.

A 50-liter tank with a five-year warranty is covered inside with heat-resistant enamel and is additionally protected from excess pressure, as well as the appearance of rust spots due to electrochemical processes suppressed by an anode of actively reacting magnesium. The cylindrical body is attached to the wall in a vertical position, pipes are connected from below, and the whole system does not particularly clutter up the usable space of a bathroom or a heated utility room.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Hotpoint-Ariston 2024 - new products, best sales and most actual models Hotpoint-Ariston.
Filters
Models
(volume) 
31 – 50
Out of stock
PRO1 R PL DRY
51 – 80
Out of stock
PRO1 R PL DRY
81 – 100
Out of stock
PRO1 R PL DRY