Honeywell FF06-3/4AAM

In the category of main filters installed directly at the inlet of the pipeline to the dwelling, the first lines of the podium are deservedly occupied by Honeywell products. With such data, as in the FT06-3/4AAM model, it is possible to embed the filter both in the pipe of the cold and hot water supply system (up to 80 °C).

Practicality

The design of the main filter is as simple as possible: a stainless steel mesh is placed inside the brass body of the product, which traps mechanical suspensions larger than 100 microns. These impurities settle on the bottom of a metal flask with a direct flush stopcock. You can get rid of them in some half a minute — the flow of water through the open valve quickly washes away the accumulated foreign bodies. By the way, during washing, filtered water continues to flow to consumers.

attractiveness

The filter housing can withstand severe pressure drops in the water supply system — up to 16 atm. And the high filtration performance (up to 6 "cubes" per hour) increases the attractiveness of the model not only in the eyes of home inhabitants, but also among small businesses. For example, the filter will work well in a small cafeteria.

Purity Guaranteed

The model is offered in many common sizes: 3/4", 1/2", 1" and 1¼" pipe connection diameters. The very place for it is in the conditions of urban apartments, where protection of water supply systems from the ingress of grains of sand, rust particles and other foreign impurities is required. Being a fighter on the invisible front due to its compact form factor, the Honeywell FT06-3/4AAM clearly and without question fulfills its mission of cutting off coarse particles at the stage of water supply directly to the dwelling.