GTL 1607 PSU 400 W
 | Outdated Product A small and relatively inexpensive Mini Tower case with a transitional design from an office platform to a home gaming case. The case is equipped with a pre-installed 400 W power supply. The chassis dimensions correspond to a micro-ATX motherboard. This is an affordable solution with a well-thought-out ventilation system. The front air intake has a contour ventilation duct with good throughput. Additionally, on the main side there is a perforated air duct, which, if necessary, can easily be equipped with an auxiliary 120 mm fan. The GTL 1607 computer case will make it possible to use a classic disk drive on your PC. There is a separate plug on the front for an external 5.25″ device. Under the drive connector there is an interface block, which includes: two USB 3.0 ports, two mini-Jack audi...o jacks. There are also buttons for turning on and rebooting, as well as LED indicators. This case is assembled according to the classical scheme. The power supply is placed upward, and the lower part of the chassis is reserved for mounting the motherboard. The memory storage devices you can use are: two 3.5″ devices and two more 2.5″ drives. Four slots are available for expansion cards. |
 |
A small and relatively inexpensive Mini Tower case with a transitional design from an office platform to a home gaming case. The case is equipped with a pre-installed 400 W power supply. The chassis dimensions correspond to a micro-ATX motherboard. This is an affordable solution with a well-thought-out ventilation system. The front air intake has a contour ventilation duct with good throughput.
Additionally, on the main side there is a perforated air duct, which, if necessary, can easily be equipped with an auxiliary 120 mm fan. The GTL 1607 computer case will make it possible to use a classic disk drive on your PC. There is a separate plug on the front for an external 5.25″ device. Under the drive connector there is an interface block, which includes: two USB 3.0 ports, two mini-Jack audio jacks. There are also buttons for turning on and rebooting, as well as LED indicators. This case is assembled according to the classical scheme. The power supply is placed upward, and the lower part of the chassis is reserved for mounting the motherboard. The memory storage devices you can use are: two 3.5″ devices and two more 2.5″ drives. Four slots are available for expansion cards.
