Galmet SGW(S)-200
 | Outdated Product $556.00 A vertical-casing floor-mounted heat accumulator. The model is suitable for both hot water supply and heating. The SGW modification provides for the presence of an indirect heating circuit. The internal heat exchanger is connected to the boiler equipment, heat pump or solar collector. Hot water is supplied with an increased capacity of up to 21 l/min. Additionally, the Galmet SGW(S)-200 floor-mounted heat accumulator supports the optional installation of a heating element with a capacity of 2 to 12 kW. The heating tank is made of steel with an internal enamel coating. Thermal insulation is represented by a thick layer of polyurethane foam. The indirect heating circuit is designed for a heating capacity of up to 48 kW. The capacity of the heat accumulator is 200 liters. The pipeline connect...ion pipes are located on the side. The coil and internal surfaces of the tank are protected from corrosion and scale using a magnesium anode. The device is protected from overheating. The standard package includes a classic single-phase electrical connection. The design includes a thermostat. The SGW water heater line includes models with the following volumes: 80, 120, 200 and 300 l. |
 |
Galmet SGW(S)-200 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
A vertical-casing floor-mounted heat accumulator. The model is suitable for both hot water supply and heating. The SGW modification provides for the presence of an indirect heating circuit. The internal heat exchanger is connected to the boiler equipment, heat pump or solar collector. Hot water is supplied with an increased capacity of up to 21 l/min. Additionally, the Galmet SGW(S)-200 floor-mounted heat accumulator supports the optional installation of a heating element with a capacity of 2 to 12 kW.
The heating tank is made of steel with an internal enamel coating. Thermal insulation is represented by a thick layer of polyurethane foam. The indirect heating circuit is designed for a heating capacity of up to 48 kW. The capacity of the heat accumulator is 200 liters. The pipeline connection pipes are located on the side. The coil and internal surfaces of the tank are protected from corrosion and scale using a magnesium anode. The device is protected from overheating. The standard package includes a classic single-phase electrical connection. The design includes a thermostat. The SGW water heater line includes models with the following volumes: 80, 120, 200 and 300 l.
Before buying always check characteristics and configuration of product with online store manager
Catalog Galmet 2024 - new products, best sales and most actual models Galmet.
- Floor installation
- Heat exchanger area — 1.5 m².
- Steel body
- S at the end of the model — leatherette case
- Model SG(S)-200 — without indirect heating circuit
- Model SGW(S)-300 — tank volume 300 L
Water heaters with a heat exchanger (indirect heating circuit) are connected to the boiler equipment. The built-in heat exchanger, connected to the boiler, allows you to heat up the entire volume of the water heater as quickly as possible, using a cheaper energy source. The storage tank provides a smooth boiler load schedule and a stable water temperature at the outlet of the water heater.
