Einhell Expert TE-TS 36/210 Li Solo (4340450)
 | Outdated Product A cordless circular saw that is suitable for home workshops or work on construction sites that are not connected to the mains. The device has enough power to cut wood up to 70 mm thick (when the blade is tilted at 45°, the maximum cutting depth is limited to 45 mm). The Einhell Expert TE-TS 36/210 Li Solo circular saw can work with saw equipment with a diameter of 210 mm (one disk with 40 teeth is included). The tool is equipped with a soft start system, which reduces the load on the engine and gearbox when the machine is turned on. The aluminum table has a folding design. It has a retractable section that moves 370mm to the right, allowing you to work with large workpieces (up to 625mm wide). The saw comes with a rip fence and miter fence. Batteries and charger are not included. To power...the machines, 2 batteries from the Einhell Power X-Change family are required simultaneously (it is recommended to use a battery with a capacity of at least 2.5 Ah, which will allow you to make about 71 cuts of OSB panels with a thickness of 19 mm). |
 |
Einhell Expert TE-TS 36/210 Li Solo | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
A cordless circular saw that is suitable for home workshops or work on construction sites that are not connected to the mains. The device has enough power to cut wood up to 70 mm thick (when the blade is tilted at 45°, the maximum cutting depth is limited to 45 mm). The Einhell Expert TE-TS 36/210 Li Solo circular saw can work with saw equipment with a diameter of 210 mm (one disk with 40 teeth is included).
The tool is equipped with a soft start system, which reduces the load on the engine and gearbox when the machine is turned on. The aluminum table has a folding design. It has a retractable section that moves 370mm to the right, allowing you to work with large workpieces (up to 625mm wide). The saw comes with a rip fence and miter fence. Batteries and charger are not included. To power the machines, 2 batteries from the Einhell Power X-Change family are required simultaneously (it is recommended to use a battery with a capacity of at least 2.5 Ah, which will allow you to make about 71 cuts of OSB panels with a thickness of 19 mm).
Before buying always check characteristics and configuration of product with online store manager
Catalog Einhell 2024 - new products, best sales and most actual models Einhell.
