Eaton 5P 650I 650 VA
 | Outdated Product Type: smart; Form factor: standard (Tower); Full load operating time (min): 2; Half load operating time (min): 9; Input voltage: 1 phase (230V); Input voltage range (V): 150-294; Peak output power (VA): 650; Rated output power (W): 420; Output waveform: pure sine wave (PSW); Dimensions (mm): 230x150x345 E-Catalog uses affiliate links compensated by our partners. |
We recommend products in stockUPS Eaton →
smart, rack, signal: sinewave, power: 750 VA, effective 600 W, battery: 7.2 Ah, batteries 4, external battery connection, sockets: C13/C14 with reserve
Eaton 5P 650I 650 VA | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Eaton 2026 - new arrivals, bestsellers, and the most relevant models Eaton.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Eaton 2026 - new arrivals, bestsellers, and the most relevant models Eaton.
Series Eaton 5 (interactive)Compare using chart →
smart, signal: similar to a sinusoid, power: 550 VA, effective 330 W, battery: 5 Ah, batteries 1, sockets: C13/C14 with reserve, C13/C14 without reserve
smart, signal: sinewave, power: 500 VA, effective 350 W, battery: 9 Ah, batteries 1, sockets: type B (American), with reserve 4
smart, signal: sinewave, power: 750 VA, effective 525 W, battery: 7 Ah, batteries 2, sockets: type B (American), with reserve 6
smart, signal: sinewave, power: 1000 VA, effective 700 W, battery: 9 Ah, batteries 2, sockets: type B (American), with reserve 8
smart, signal: sinewave, power: 1440 VA, effective 1080 W, battery: 9 Ah, batteries 3, sockets: type B (American), with reserve 8
smart, signal: sinewave, power: 750 VA, effective 600 W, battery: 7 Ah, batteries 2, sockets: type B (American), with reserve 8
smart, signal: sinewave, power: 1000 VA, effective 770 W, battery: 9 Ah, batteries 2, sockets: type B (American), with reserve 8
smart, signal: sinewave, power: 1440 VA, effective 1100 W, battery: 9 Ah, batteries 3, sockets: type B (American), with reserve 8
smart, signal: sinewave, power: 1500 VA, effective 1050 W, battery: 9 Ah, batteries 2, sockets: C13/C14 with reserve
smart, signal: sinewave, power: 750 VA, effective 525 W, battery: 7 Ah, batteries 2, sockets: C13/C14 with reserve
AccessoriesAll accessories for Eaton 5P 650I →
The device is intended primarily for office use. The UPS is able to work around the clock, supporting the functioning of server and other IT equipment. The device protects expensive equipment from power surges. The device is quite heavy, so it is best to put it on the floor. I paid attention to this model because of the wide input voltage range. The device digests well from 160 to 290 V, without switching to battery operation. Batteries are only used during a power outage. A couple of times the light went out for an hour, but the supply was enough for the server to continue to function. The consumption optimization system is interestingly implemented. When there is no light, you can turn off some non-critical equipment to keep the server running as long as possible. The remaining energy can be monitored using the display or using special software. The system accurately estimates the amount of charge in the batteries. It's nice that the device has developed communication capabilities. There is a USB port and RS232. There is also a small terminal block for emergency power off. For three months of work in a constant mode, no critical problems were identified. The only thing is that the USB port and RS232 do not work at the same time, only in series. Such is the feature of this model. use Eaton 5P 1150I month or more |
Add Review