Classic VM 80 N4L
 | Outdated Product An affordable electric storage water heater with a volume of 80 liters with a submersible heating element with a power of 1500 W and high-quality thermal insulation. Mounted on the wall in a vertical orientation, communications are supplied from below. It is positioned as a product in the basic price category, intended for organizing a hot water supply system in a private house, city apartment or hotel room. Can satisfy the household needs of a small family of 2-3 people. Thanks to its significant useful volume, it can work at several water points at once. The design of the Classic VM 80 N4L water heater consists of an outer metal casing, effective thermal insulation made of high-density polyurethane foam, as well as a durable inner tank made of cold-rolled sheet steel (designed for operat...ion at pressures up to 8 bar). To protect the metal from the aggressive effects of hot water, an enamel coating that is resistant to temperature changes and an additional sacrificial magnesium anode are used. A reliable mechanical thermostat is used to regulate the temperature. A submersible heating element heats the entire volume of the apparatus from 15 to 65 °C in less than 3 hours. E-Catalog uses affiliate links compensated by our partners. |
Classic VM 80 N4L | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
An affordable electric storage water heater with a volume of 80 liters with a submersible heating element with a power of 1500 W and high-quality thermal insulation. Mounted on the wall in a vertical orientation, communications are supplied from below. It is positioned as a product in the basic price category, intended for organizing a hot water supply system in a private house, city apartment or hotel room.
Can satisfy the household needs of a small family of 2-3 people. Thanks to its significant useful volume, it can work at several water points at once. The design of the Classic VM 80 N4L water heater consists of an outer metal casing, effective thermal insulation made of high-density polyurethane foam, as well as a durable inner tank made of cold-rolled sheet steel (designed for operation at pressures up to 8 bar). To protect the metal from the aggressive effects of hot water, an enamel coating that is resistant to temperature changes and an additional sacrificial magnesium anode are used. A reliable mechanical thermostat is used to regulate the temperature. A submersible heating element heats the entire volume of the apparatus from 15 to 65 °C in less than 3 hours.
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Classic 2026 - new arrivals, bestsellers, and the most relevant models Classic.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Classic 2026 - new arrivals, bestsellers, and the most relevant models Classic.
Which is better: wet or dry heating element in a water heater?Learning the design features, pros and cons of "wet" and "dry" heating elements in water heaters
Detailed FAQ on storage water heatersWe answer the most common questions regarding the installation and operation of storage water heaters
Model overview based on user reviews
The Classic VM N4L water heater has received mixed reviews from users. One user reported a significant issue with the factory mounting, which failed and caused the boiler to fall, resulting in damage to their bathroom. They expressed dissatisfaction with the service center's response, feeling that the manufacturer should take responsibility. In contrast, another user has had a positive experience, with the boiler functioning well for over three years without any issues. This suggests that while the product can perform reliably, potential buyers should be cautious about installation and consider the service support available.
Pros
Cons
Draw your own conclusions! My advice is to buy not only equipment based on its characteristics, but also find out about the attitude towards customers in service centers, etc.... in order to avoid problems in the future! The salesman at the construction supermarket successfully promoted this boiler to us, so we bought it. It was installed by a craftsman with 10 years of experience! Everything was done according to the instructions and so on (every step was controlled and checked according to the installation/operation manual). We fitted it several times, hung it, made sure it was securely fastened, level, and so on. Before connecting the electricity, we decided to check if it would fill with water. It filled with water and hung for exactly one and a half minutes, then the 100 kg simply crashed into the bathroom, breaking shelves, hoses, tap, and damaging tiles. The factory mounting on the boiler just bent, couldn’t withstand the weight, and snapped. Luckily, the craftsman managed to pull his head out from under it just seconds before it fell! A specialist from the service center (Atlantic) came (immediately showing with his demeanor that it was our fault and that his visit was merely formal), straightened the bent mounting three times and only then managed to hang it, issuing us a paper stating that we were responsible, on which I was supposed to leave my comment, and when I took the sheet to write, he followed me saying, "Oh, you don't need to write anything, you'll just scribble a lot..." And that's where they distanced themselves from us; all the independent specialists we consulted for an explanation of the situation (these were craftsmen, salespeople, employees of construction hypermarkets like Epicenter and Nova Line) unanimously said that it was the manufacturer's fault, and they should replace it, but the service center employees are giving excuses and not taking back the equipment because it affects their bonuses! Very weak factory fastening on the boiler i recommend it don't buy |
Has been working for over 3 years now with no issues. A water heater is like a water heater. It does its job and I can't expect more from it. use Classic VM 80 N4L month or more i recommend it should buy |
Add Review
Additional features water heater Classic VM 80 N4L:
- Working pressure — 6 bar
We recommend
tankless, gas, heat exchanger, from overheating, dry heating protection, gas control, draft sensor, turbo, 38 - 58 kW, 76.5x47x29 cm, vertical
tankless, gas, heat exchanger, from overheating, dry heating protection, gas control, draft sensor, turbo, 41 - 58 kW, 69.3x35.7x27.4 cm, vertical
tankless, gas, heat exchanger, from overheating, dry heating protection, gas control, draft sensor, turbo, 41 - 58 kW, 62.6x35.7x27.4 cm, vertical
tankless, gas, heat exchanger, from overheating, dry heating protection, gas control, draft sensor, turbo, 58 kW, 67x47x29 cm, vertical