Dark mode
USA
Catalog   /   Computing   /   Components   /   Computer Cases   /   Chieftec

Chieftec Chieftronic M1 black (GM-01B-OP)

Photos - Computer Case Chieftec Chieftronic M1 black
Videos 1Photos 13
Outdated Product
Features: gaming; Form factor: Cube Case; Mount: vertical; Motherboard support: micro-ATX; PSU form factor: ATX (regular); Dimensions (mm): 345x270x400; Weight (kg): 7.47; Material: steel; 3.5" bays: 2; internal 2.5" compartments: 2; Expansion slots: 4; Graphics card vertical mount; Fans total: 1
add to listmy lists
Chieftec Chieftronic M1 black
Chassis Form Factor:Cube Case
Motherboard size:micro-ATX
PSU power:no PSU
Internal bays 3.5":2
Internal bays 2.5":2
Front panel:USB A 4
Three glass panels, fits a tall cooler or a two-section dropsy. Pre-installed 12cm fan. Two LED strips and an RGB hub.
Not compatible with full size ATX motherboards.
All specifications
Specifications Chieftronic M1
Colour
Featuresgaming
Form factorCube Case
Mountvertical
Motherboard supportmicro-ATX
Board placementhorizontal
PSU form factorATX (regular)
Computer case
Dimensions (HxWxD)345x270x400 mm
Graphics card max lenght320 mm
Fan max height180 mm
Weight7.47 kg
Materialsteel
Sidewall thickness0.8 mm
Rubber feet
Lighting typebacklit fan / housing
Lighting colourRGB
Lighting syncmulti compatibility
Side panelremovable
Storage
PSU
PSU mountbottom
3.5" bays2
internal 2.5" compartments2
Expansion slots4
Graphics card vertical mount
Cooling
Fans total1
Fans (back)1x140mm / 1x120mm /
Fans (front)2x140mm / 2x120mm /
Fan mounts total3
Dust filter+
Liquid cooling support
Liquid cooling system
Liquid cooling (front)280 mm
Liquid cooling mounts1
Connectors and functions
Placementon the side wall
USB 2.02
USB 3.2 gen12
Audio (microphone/headphones)
More features
Side panel windowtempered glass
More featuresremovable HDD cage
Added to E-Catalogjanuary 2020
P/N
GM-01B-OP

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Chieftec 2025 - new products, best sales and most actual models Chieftec.
Video reviews

glass cube

Chieftec Chieftronic M1 is a relatively compact, strictly for micro-ATX (or even smaller mini-ITX) motherboard computer case in the form of a glass cube. Three of its panels are transparent and lightly tinted so that you can admire the powerful and beautiful internal components of the PC. The material of the panels is tempered glass, so you don't have to worry about scratches. A 12cm backlit fan, two LED strips and an RGB hub are included.

Air or water

The frame of the Chieftronic M1 is made of thick-walled steel (0.8 mm), which gives the case a weight (7.5 kg) for better absorption of vibration from hard drives. There are two seats available for these same 3.5-inch HDDs, and the same number for 2.5-inch SSDs. A tower CPU cooler can fit up to 18 cm high, there are no such coolers in nature, but as they say, a lot is not a little. If desired, you can replace the air cooler with a dropsy, since there is room on the front panel for a 28 cm coolant.

Mid-range graphics card

But the graphics card in the Chieftronic M1 fits only up to 32 cm long. This is a typical length for large two-fan and relatively compact three-fan graphics cards, but, of course, sometimes there are models that are even longer. Power supplies are supported up to 18 cm long, with neat wiring and laying their wires there will be no problems.

Reliable power supply

The perfect partner for the Chieftronic M1 case is the Chieftec Photon modular 750-watt power supply. Its power is enough to power even a bundle of a highly overclocked processor and the most power-hungry graphics card (two lines of +12 volts with a capacity of 30 amperes each). And the power reserve will allow the PSU to be loaded not at full strength and due to this it will cool almost silently. In addition, both the Chieftronic M1 case and the Chieftec Photon PSU are decorated with RGB lighting, which can be synchronized with the motherboard to glow in unison.

Filters