BLUETTI AC70P
 |
 |
BLUETTI AC70P | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Portable power station for use at home (in case of power outages) and on-site. The model is capable of powering a load with a total power of up to 1000 W, while the charging station can withstand short-term power surges of up to 2000 W. A lithium iron phosphate battery (LiFePO4) with a capacity of 864 Wh is installed inside the uninterruptible power supply. The battery retains over 80% of its original energy capacity even after 3000 charge/discharge cycles.
The BLUETTI AC70P is equipped with two sockets with an output voltage of 230 V, a 12 V cigarette lighter, two full-size USB ports, two USB type C interfaces with support for Power Delivery fast charging (up to 100 W), and an XT60 input connector. You can control the operation of the station from the on-board panel or through a mobile application via Bluetooth. The energy reserves in the battery cells of the model are replenished by 80% in approximately 45 minutes. (when using 850 W turbo charging). The station is also charged from solar panels with a power of up to 500 W (in about 2 hours). The UPS weighs 10.2 kg.
Before buying always check characteristics and configuration of product with online store manager
The BLUETTI AC70P charging station is ideal for those who experience regular power outages, as well as for outdoor trips and road trips far from civilization.
Durable and long-lasting battery
The station has compact dimensions of 256x314x210 mm and weighs about 10 kg, which is approximately equal to two stacked shoe boxes. Inside the device is a lithium-iron-phosphate battery with a capacity of 864 Wh, which retains more than 80% of its capacity even after 3000 charge and discharge cycles. In turbo charging mode from the network, the battery can be charged from zero to 80% in just 45 minutes.
Automatic reservation
The station is capable of handling loads with a total power of up to 1000 W, and in short-term mode supports powers of up to 2000 W. The built-in UPS function allows automatic switching of connected devices to battery power in the event of power outages, switching within 20 ms.
Wired interfaces and wireless charging area
The front panel of the device contains an information display and all connection ports. The user has two 230 V sockets with a pure sine wave output, two USB A, one USB type C with a power of up to 100 W, a DC port and an XT-60 input connector. Also on the back of the station is a zone for wireless charging of mobile devices with a power of 15 W. The station can support connection with smartphones or tablets via Bluetooth.
