USA
Catalog   /   Climate, Heating, Water Heating   /   Heating & Boilers   /   Boilers   /   BAXI

BAXI SLIM 1.620 iN 62.2 kW (WSB43162347)

Photos - Boiler BAXI SLIM 1.620 iN 62.2 kW
Outdated Product
$1,316.72 up to $1,626.76
The older model of the floor single-circuit gas heating boiler from the Baxi Slim family. It features ultra-high useful heat output (up to 62.2 kW) and the use of a reliable cast iron 9-section heat exchanger, the design of which provides a decent level of energy efficiency and a long service life. Equipped with a microprocessor control system, high-quality gas automatics and an atmospheric burner with continuous electronic flame modulation. The impressive heat output allows heating large houses/cottages, commercial, east european and industrial premises up to 466 m2. The BAXI SLIM 1.620 iN boiler can be paired with an external indirect heating boiler for hot water preparation and used in cascade heating systems. Operation is supported in two operating temperature ranges of the coolant (30...-80 °C and 30-45 °C), which allows using this model in "warm floor" systems. It should be noted that the device is adapted for east european conditions and can operate at reduced gas pressure (up to 5 mbar). Designed for installation in non-residential (boiler) premises with fresh air supply and a full-fledged chimney system that provides stable natural draft.
add to listmy lists
BAXI SLIM 1.620 iN 62.2 kW
Energy source:gas
Mount:floor, single-circuit
Boiler power:62.2 kW, area ~ 466 m²
Combustion chamber:open, flue 180 mm

The older model of the floor single-circuit gas heating boiler from the Baxi Slim family. It features ultra-high useful heat output (up to 62.2 kW) and the use of a reliable cast iron 9-section heat exchanger, the design of which provides a decent level of energy efficiency and a long service life. Equipped with a microprocessor control system, high-quality gas automatics and an atmospheric burner with continuous electronic flame modulation.

The impressive heat output allows heating large houses/cottages, commercial, east european and industrial premises up to 466 m2. The BAXI SLIM 1.620 iN boiler can be paired with an external indirect heating boiler for hot water preparation and used in cascade heating systems. Operation is supported in two operating temperature ranges of the coolant (30-80 °C and 30-45 °C), which allows using this model in "warm floor" systems. It should be noted that the device is adapted for east european conditions and can operate at reduced gas pressure (up to 5 mbar). Designed for installation in non-residential (boiler) premises with fresh air supply and a full-fledged chimney system that provides stable natural draft.

FAQ: 10 frequently asked questions about heating boilersAnswers to common questions in the section "heating boilers"
All specifications
Specifications SLIM 1.620 iN
Main
Energy sourcegas
Installationfloor
Typesingle-circuit (heating only)
Heating area466 m²
Technical specs
Heat output62.2 kW
Power supply230 V
Power consumption15 W
Coolant min. T30 °С
Coolant max. T85 °С
Consumer specs
Outdoor temperature sensor
Heated floor mode
Circulation pump
Control busOpenTherm
Boiler specs
Efficiency90.1 %
Combustion chamberopen (atmospheric)
Flue diameter180 mm
Inlet gas pressure20 mbar
Max. gas consumption7.3 m³/h
Heat exchangercast iron
Connections
Gas supply3/4"
Central heating flow1 1/4"
Central heating return1 1/4"
Safety
Safety systemsgas pressure drop
water overheating
flame loss
power outage
frost protection
More specs
Dimensions (HxWxD)1650x350x875 mm
Weight224 kg
Added to E-Catalogaugust 2010
P/N
WSB43162347

FAQ: 10 frequently asked questions about heating boilersAnswers to common questions in the section "heating boilers"
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog BAXI 2024 - new products, best sales and most actual models BAXI.
Filters
Models
Brands
(energy source) 
gas 
Out of stock
SLIM 1.620 iN