APNX Creator C1 white (APCM-CR01043.21)
 | Expecting restock $99.99 An interesting premium Midi Tower case that combines a beautiful appearance, reliable build quality and impressive cooling performance. Even taking into account the mass popularity of Airflow cases, the APNX Creator C1 is able to surprise with the fact that inside the case you can place 11 (!) air fans that will generate arctic cold inside a small box. In the case of using mid-level components that do not need record cooling, a potential owner can save on fans, since 4 fans were pre-installed by the manufacturer. They are organized in accordance with the spirit of the times: three fans are placed behind the front cover, and the fourth is located at the back for additional airflow. At the same time, the front door, the top cover and one of the sides are made of dense mesh material, providin...g good airflow and at the same time opening a view of the backlight. The other side is traditionally made of tempered glass to emphasize the emphasis on the ARGB backlight of the pre-installed fans. By the way, the backlight is compatible with Polychrome Sync, Mystic Light, Aura Sync and other software and hardware illumination control systems. Among other features of the case, it is worth highlighting the solid capacity (395 mm for video cards, 166 mm for a tower cooler, 6 pockets for drives), a hidden lower compartment for a power supply and unnecessary cables, 3 platforms for water pumps (maximum 360 mm), several magnetic filters for dust and a front panel with USB C. |
 |
An interesting premium Midi Tower case that combines a beautiful appearance, reliable build quality and impressive cooling performance. Even taking into account the mass popularity of Airflow cases, the APNX Creator C1 is able to surprise with the fact that inside the case you can place 11 (!) air fans that will generate arctic cold inside a small box. In the case of using mid-level components that do not need record cooling, a potential owner can save on fans, since 4 fans were pre-installed by the manufacturer.
They are organized in accordance with the spirit of the times: three fans are placed behind the front cover, and the fourth is located at the back for additional airflow. At the same time, the front door, the top cover and one of the sides are made of dense mesh material, providing good airflow and at the same time opening a view of the backlight. The other side is traditionally made of tempered glass to emphasize the emphasis on the ARGB backlight of the pre-installed fans.
By the way, the backlight is compatible with Polychrome Sync, Mystic Light, Aura Sync and other software and hardware illumination control systems. Among other features of the case, it is worth highlighting the solid capacity (395 mm for video cards, 166 mm for a tower cooler, 6 pockets for drives), a hidden lower compartment for a power supply and unnecessary cables, 3 platforms for water pumps (maximum 360 mm), several magnetic filters for dust and a front panel with USB C.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog APNX 2025 - new products, best sales and most actual models APNX.
Award for Design
APNX Creator C1 is a case from the premium sub-brand AeroCool, which won the prestigious Red Dot Award for design. Available colors are black, white, or pearlescent blue Chroma Flair. The front ventilation grille is made of 0.8 mm thick steel and smoothly bends back, giving the case an aerodynamic shape. Thanks to its thoughtful design, it is easy to disassemble and assemble.
Enhanced Airflow
Behind the front panel grille is a fine dust filter (another one at the bottom), and behind it is a trio of APNX FP1 fans with a diameter of 14 cm. They have an increased thickness from 25 to 30 mm, allowing them to move a larger volume of air per unit of time. A fourth fan, already 12 cm in size but also with ARGB lighting, is located at the back.
Motherboard Convection
Another six fans or two three-section water blocks can be mounted under the roof of the case and parallel to the motherboard. The maximum length of the graphics card is 39.5 cm. The side panels are made of glass and steel, respectively. The second panel has holes drilled opposite the VRM power zone to allow for cooling from the backside of the motherboard through natural convection.
