APC Back-UPS ES 700VA BE700G-RS 700 VA
Photos 4 | Outdated Product $126.73 up to $150.68 Quite a classic uninterruptible power supply of a backup type (Offline), which can be conditionally classified as a mid-range solution. The active power of the device is 405 watts. At half load, the APC Back-UPS ES 700VA provides approximately 12 minutes of runtime. The output signal is an approximate sinusoid. There is an input voltage stabilizer (range 180-266 V). The maximum input current is 10 A. Also note that the uninterruptible power supply has 8 sockets, of which only 4 are used for backup power. However, this model can also be used as a surge protector. In the role of indication, LED and sound notification are used. The UPS can be used to protect the RJ-45 communication line. Each time the device is turned on, a self-diagnosis is performed — the analysis system will notify the adm...inistrator about the need to change the battery pack. A maintenance-free lead-acid AGM battery with a sealed case and a thick electrolyte is used as a battery. The UPS during operation has an acceptable noise level (up to 45 dB). The housing does not require rigid fixation for installation. |
APC Back-UPS ES 700VA BE700G-RS 700 VA 550 VA 700 VA | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Quite a classic uninterruptible power supply of a backup type (Offline), which can be conditionally classified as a mid-range solution. The active power of the device is 405 watts. At half load, the APC Back-UPS ES 700VA provides approximately 12 minutes of runtime. The output signal is an approximate sinusoid. There is an input voltage stabilizer (range 180-266 V). The maximum input current is 10 A.
Also note that the uninterruptible power supply has 8 sockets, of which only 4 are used for backup power. However, this model can also be used as a surge protector. In the role of indication, LED and sound notification are used. The UPS can be used to protect the RJ-45 communication line. Each time the device is turned on, a self-diagnosis is performed — the analysis system will notify the administrator about the need to change the battery pack. A maintenance-free lead-acid AGM battery with a sealed case and a thick electrolyte is used as a battery. The UPS during operation has an acceptable noise level (up to 45 dB). The housing does not require rigid fixation for installation.
Before buying always check characteristics and configuration of product with online store manager
Catalog APC 2024 - new products, best sales and most actual models APC.