Aerocool Split black (Split-A-BK-v1)
 | Outdated Product $58.35 Behind the rather stylish appearance of this low-cost case, there is a good capacity that allows you to place performant components inside. The platform features built-in RGB lighting and multiple ventilation channels. The typical case size corresponds to the Midi Tower form factor, the tray is ready to accommodate an ATX-compatible motherboard. 326 mm is allocated for discrete video, and processor cooling can reach 155 mm. The internal space of the platform is represented by a single chamber, without division into sections. The power supply is attached at the top. The Aerocool Split case has a spectacular RGB backlight on the front panel with 13 different modes of operation, to switch between which a dedicated button is provided. Regular cooling is represented by one 120 mm bladed impelle...r. The efficiency of air cooling is increased by ventilation ducts around the perimeter of the front panel. The case provides four seats for memory drives (two 3.5" HDDs and the same number of 2.5" SSDs). There are seven horizontal plugs for PCI expansion cards. One of the sidewalls of the system unit is made of acrylic, but this case can also be found in a tempered glass version — the model with a side glass panel is called Split Tempered Glass. |
 |
Behind the rather stylish appearance of this low-cost case, there is a good capacity that allows you to place performant components inside. The platform features built-in RGB lighting and multiple ventilation channels. The typical case size corresponds to the Midi Tower form factor, the tray is ready to accommodate an ATX-compatible motherboard. 326 mm is allocated for discrete video, and processor cooling can reach 155 mm.
The internal space of the platform is represented by a single chamber, without division into sections. The power supply is attached at the top. The Aerocool Split case has a spectacular RGB backlight on the front panel with 13 different modes of operation, to switch between which a dedicated button is provided. Regular cooling is represented by one 120 mm bladed impeller. The efficiency of air cooling is increased by ventilation ducts around the perimeter of the front panel. The case provides four seats for memory drives (two 3.5" HDDs and the same number of 2.5" SSDs). There are seven horizontal plugs for PCI expansion cards. One of the sidewalls of the system unit is made of acrylic, but this case can also be found in a tempered glass version — the model with a side glass panel is called Split Tempered Glass.
