Aerocool Rev RGB Pro
 | Outdated Product A set of three spectacular 120mm RGB LED case fans with a limited maximum rotation speed (up to 1200 rpm). The kit includes a separate controller-hub Aerocool P7-H1 to control the lighting of coolers and additional LED strips (up to 5 units in total). Positioned as a product of the middle price category, focused on use in modding systems. Due to their decent performance, the fans can provide cooling for a high-performance gaming configuration assembled in a case designed for the use of 120x120x25 mm coolers. Equipped with an optimized 11-blade impeller that effectively directs air flows, increasing its pressure and providing maximum air exchange with a minimum noise level (15 dB). The fans of the Aerocool Rev RGB Pro kit are equipped with special silicone vibration-absorbing pads that prev...ent the transmission of vibration to the structural elements of the case. However, it is worth noting that for the most complete damping of vibrations and noise, the fans should be fastened not with metal bolts, but with damping silicone clamps. For easy cleaning of accumulated dust, the impeller is removable. The fans are equipped with hydrodynamic bearings and are driven by a 3-pin connector. To control the backlight, there is a separate 4-pin connector attached to the hub. |
 |
A set of three spectacular 120mm RGB LED case fans with a limited maximum rotation speed (up to 1200 rpm). The kit includes a separate controller-hub Aerocool P7-H1 to control the lighting of coolers and additional LED strips (up to 5 units in total). Positioned as a product of the middle price category, focused on use in modding systems. Due to their decent performance, the fans can provide cooling for a high-performance gaming configuration assembled in a case designed for the use of 120x120x25 mm coolers.
Equipped with an optimized 11-blade impeller that effectively directs air flows, increasing its pressure and providing maximum air exchange with a minimum noise level (15 dB). The fans of the Aerocool Rev RGB Pro kit are equipped with special silicone vibration-absorbing pads that prevent the transmission of vibration to the structural elements of the case. However, it is worth noting that for the most complete damping of vibrations and noise, the fans should be fastened not with metal bolts, but with damping silicone clamps. For easy cleaning of accumulated dust, the impeller is removable. The fans are equipped with hydrodynamic bearings and are driven by a 3-pin connector. To control the backlight, there is a separate 4-pin connector attached to the hub.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Aerocool 2024 - new products, best sales and most actual models Aerocool.
